ratdude747 Posted September 23, 2020 Share Posted September 23, 2020 It wasn't the speed control that caught fire, it was the bottom of the master cylinder mounted cancel switch. It was there for the same reason the vacuum ones have a dump valve on the brake pedal support, if the brake light switch is bad then no release signal is sent to the electronic module. Since the electric one uses no vacuum there had to be another fail safe, The hydraulic switch interrupts the power to the clutch that engages the cable wheel. Didn't know that. All the recall/TSB info I saw referred to the "Texas Instruments control module"... Link to comment Share on other sites More sharing options...
MarkF100 Posted September 23, 2020 Share Posted September 23, 2020 Congratulations to all of the winners and all who participated. Loved seeing what others have done with their truck. Link to comment Share on other sites More sharing options...
reamer Posted September 23, 2020 Share Posted September 23, 2020 Congratulations to all of the winners and all who participated. Loved seeing what others have done with their truck. Excellent work to everyone who participated! Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 23, 2020 Author Share Posted September 23, 2020 Excellent work to everyone who participated! Yes, it was excellent work. Lots of people did a lot of work. I was impressed. And, by the way, the trophies and certificates are on their way to the winners. Link to comment Share on other sites More sharing options...
Dorsai Posted September 26, 2020 Share Posted September 26, 2020 Bill - I probably have an extra of the electrical module. So hang on to that one as someone will need it. Just wanted to say thank you, again, to Gary for hosting this year’s show, as well as to everyone who participated as entrants and judges. Look what I got in the mail today: Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 26, 2020 Author Share Posted September 26, 2020 Just wanted to say thank you, again, to Gary for hosting this year’s show, as well as to everyone who participated as entrants and judges. Look what I got in the mail today: Yippee! Glad it made it. And, glad you put it together. Link to comment Share on other sites More sharing options...
Rembrant Posted September 27, 2020 Share Posted September 27, 2020 Just wanted to say thank you, again, to Gary for hosting this year’s show, as well as to everyone who participated as entrants and judges. Look what I got in the mail today: http://forum.garysgaragemahal.com/file/n75444/13DDAE42-27B9-4D00-9DFE-E158A7A3E627.jpeg Cool pic and nice trophies. Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 27, 2020 Author Share Posted September 27, 2020 Just wanted to say thank you, again, to Gary for hosting this year’s show, as well as to everyone who participated as entrants and judges. Look what I got in the mail today: http://forum.garysgaragemahal.com/file/n75444/13DDAE42-27B9-4D00-9DFE-E158A7A3E627.jpeg Cool pic and nice trophies. Let us know when yours gets there. Link to comment Share on other sites More sharing options...
Rembrant Posted September 27, 2020 Share Posted September 27, 2020 Let us know when yours gets there. Absolutely. It'll take a couple weeks, but I'll be showing it off when it arrives. Link to comment Share on other sites More sharing options...
1986F150Six Posted September 28, 2020 Share Posted September 28, 2020 Just wanted to say thank you, again, to Gary for hosting this year’s show, as well as to everyone who participated as entrants and judges. Look what I got in the mail today: http://forum.garysgaragemahal.com/file/n75444/13DDAE42-27B9-4D00-9DFE-E158A7A3E627.jpeg What are your plans for continuing trophy gathering for next year, Matthew? Link to comment Share on other sites More sharing options...
Recommended Posts