NostraDanus Posted September 12, 2020 Posted September 12, 2020 Hello all, my name is Dan and my current bullnose (and hopefully I'll have it until I pass it on) is a 1986 Bronco XLT with 1995 F150 Lightning 5.8L. No lift, just close to original. I am a Master Engineering Technologist at Ford and currently have the pleasure of working on forthcoming projects like the next F150, Bronco, and Bronco Sport. I've been around a while and hopefully I can be of some use to another member that needs some technical help one of these days.
Gary Lewis Posted September 12, 2020 Posted September 12, 2020 Welcome, Dan! Would you like to be on our map? Bullnose Forum/Member's Map in the menu. Please tell us about what you do. I'm sure you can't share information about upcoming vehicles, but maybe from what you tell us about your job we'll know what questions to ask.
grumpin Posted September 12, 2020 Posted September 12, 2020 Welcome, Dan! Would you like to be on our map? Bullnose Forum/Member's Map in the menu. Please tell us about what you do. I'm sure you can't share information about upcoming vehicles, but maybe from what you tell us about your job we'll know what questions to ask. Welcome!
ArdWrknTrk Posted September 12, 2020 Posted September 12, 2020 Welcome Dan! How did you get your Bronco, and what brought you here? We love pictures too... 😉Â
NostraDanus Posted September 14, 2020 Author Posted September 14, 2020 Welcome, Dan! Would you like to be on our map? Bullnose Forum/Member's Map in the menu. Please tell us about what you do. I'm sure you can't share information about upcoming vehicles, but maybe from what you tell us about your job we'll know what questions to ask. Thanks, Gary. Yes, please add me to the map. As for my job, I work in chassis controls... this involves all electronic controls that are encompassed in the brake control module including ABS, electronic stability control, roll stability control, trailer sway control, and a whole bunch of other things that people like me don't think they really need. I run the garage the that is responsible for instrumenting and outfitting of test vehicles for development. We install pressure transducers, height sensors, fabricate outrigger assemblies (for anti-rollover testing,) weight holding equipment, and any other requested equipment to complete a task. I also perform limit handling testing to acquire data used for calibrating systems. The job is based out of the Dearborn Development Center test track in Michigan but involves travel for testing in all types of conditions including low mu testing in snow/ice in the upper peninsula of Michigan, hi mu winter testing at our Arizona proving ground, Silver Lake sand dunes, the Borrego desert, and several sensitivity locations like Tail of the Dragon and whatever else they think we need. You're correct about future product.. I will never engage in conversation about it. I am slow to respond due to the fact that I am one of the few on site full time responding to all requests so days are long.
NostraDanus Posted September 14, 2020 Author Posted September 14, 2020 Welcome Dan! How did you get your Bronco, and what brought you here? We love pictures too... 😉 My Bronco project started in 1998 when I was working at a Ford dealer near Detroit when I got word Ford would stop factory support for bullnose sheet metal. My first truck was a 1982 F-150 XLS flareside manual and my second was a 1984 Bronco. To me, bullnose Fords are the best looking trucks ever made, I was single and decided to make the Bronco I always wanted and went in search the truck I wanted to start with. I found this page while on a search for a factory part number and the Google stumbled upon one of the forums. I think my favorite thing so far is all of the flairsides I've seen in the truck show entries. I see them and think of my first truck
ArdWrknTrk Posted September 15, 2020 Posted September 15, 2020 My Bronco project started in 1998 when I was working at a Ford dealer near Detroit when I got word Ford would stop factory support for bullnose sheet metal. My first truck was a 1982 F-150 XLS flareside manual and my second was a 1984 Bronco. To me, bullnose Fords are the best looking trucks ever made, I was single and decided to make the Bronco I always wanted and went in search the truck I wanted to start with. I found this page while on a search for a factory part number and the Google stumbled upon one of the forums. I think my favorite thing so far is all of the flairsides I've seen in the truck show entries. I see them and think of my first truck I've come to nickname this the FOG, or Flareside Owners Group. It's amazing how many of these trucks and their caretakers are here, on a percentage basis. Perhaps they were less abused as work trucks, so more survived. No idea what the production numbers were. I suppose Marti could answer that. But they are really popular among enthusiasts.
Recommended Posts