Jump to content
Bullnose Forums

For those looking for Wimbledon White paint match & steel wheel resto


66gtk

Recommended Posts

$4 / can on the shelf at Menards. Rustoleum Canvas White. This is a really, really good match. I have a set of WW wheels with original paint and this matched well as you can see. The first photo shows a tape line revealing the new paint with the old original paint. They also sell this at Menards for $9 / quart.

IMG_20200811_135522495_HDR_(1).thumb.jpg.b5226160e9239923518d5450a33263c5.jpg

IMG_20200811_140456374_HDR.thumb.jpg.4b9e255ca148fd70ac9a3267c2067c4d.jpg

IMG_20200811_145016336.jpg.d158c9100c6a5fc44981d23626178d6e.jpg

Link to comment
Share on other sites

Thank you very much for this! I have really grown fond of the Wimbledon white on my ‘81 and was hoping there might be something close that was available off the shelf (in an aerosol) besides the tiny little expensive cans of color match. This will save me the trial and error... :nabble_anim_handshake:
Link to comment
Share on other sites

Thank you very much for this! I have really grown fond of the Wimbledon white on my ‘81 and was hoping there might be something close that was available off the shelf (in an aerosol) besides the tiny little expensive cans of color match. This will save me the trial and error... :nabble_anim_handshake:

F834

If you ever want to get rid of the gear vendors give me a shout

Tom

 

Link to comment
Share on other sites

  • 2 years later...

F834

If you ever want to get rid of the gear vendors give me a shout

Tom

Now over $9/can at Menards... :nabble_anim_confused:

I got a wheel for $10 on Craigslist and it looked like this.

PXL_20230619_170916958.jpg.b1bdcba71b70928dc88b3f0f23436653.jpg

80 minutes later after some wire wheeling, hand sanding and 2 coats of paint.

PXL_20230619_182128768.thumb.jpg.7f3994c4a70974a887545cbf9e52ae6b.jpg

PXL_20230620_000240343.jpg.fdf37f91e6692e72c5a81632efb78dc3.jpg

Link to comment
Share on other sites

Now over $9/can at Menards... :nabble_anim_confused:

I got a wheel for $10 on Craigslist and it looked like this.

80 minutes later after some wire wheeling, hand sanding and 2 coats of paint.

Wire wheel, 120, 220. Blow out dust, wipe down with mineral spirits. Sprayed directly over this....2 coats covered well.

PXL_20230619_180158194.thumb.jpg.7d43f6286822a7f03d9e92803b7abe31.jpg

Link to comment
Share on other sites

×
×
  • Create New...