Gary Lewis Posted October 25, 2018 Author Share Posted October 25, 2018 I've added the low res/high res function to both the 1985 Ford Truck and the 1986 Ford Trailer Towing brochures. And, I discovered that some of my pdf's were showing poor quality renderings, so I replaced them. I'm sure there are probably others, so if you find one that looks really yukky then please let me know. Noah Garay, from Facebook, sent me the installations instructions for the Warn front bumper that is on Big Blue. I added it to the Exterior/Bumpers page. Thanks, Noah! Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 27, 2018 Author Share Posted October 27, 2018 Noah Garay, from Facebook, sent me the installations instructions for the Warn front bumper that is on Big Blue. I added it to the Exterior/Bumpers page. Thanks, Noah! I revised things a bit. Discovered I had both a Rear Axles page as well as a Differentials page. There is now one page: Driveline/Axles & Differentials and it has the info from both of those pages. And those pages have been deleted, and a redirect to the new page created so if someone had the old ones bookmarked they'll still find the info. I'm not really done with this new page, but it is an improvement - I think. Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 30, 2018 Author Share Posted October 30, 2018 I revised things a bit. Discovered I had both a Rear Axles page as well as a Differentials page. There is now one page: Driveline/Axles & Differentials and it has the info from both of those pages. And those pages have been deleted, and a redirect to the new page created so if someone had the old ones bookmarked they'll still find the info. I'm not really done with this new page, but it is an improvement - I think. I added a page on switches: Electrical/Switches. It isn't done, but it is at least started. Please take a look and let me know what switches I'm missing. And, note that there are 3 different fog/road lamp switches! I wonder if we've looked for all three of those? Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 10, 2018 Author Share Posted November 10, 2018 I added a page on switches: Electrical/Switches. It isn't done, but it is at least started. Please take a look and let me know what switches I'm missing. And, note that there are 3 different fog/road lamp switches! I wonder if we've looked for all three of those? Had someone ask me for info on the engine compartment light, including the retainers for the wire loom. Check this out: Underhood/Engine Compartment Light. And, with the permission of our new member, Snow Monkey, I added his timing instructions to the IDI page: Engines/IDI Diesel. Link to comment Share on other sites More sharing options...
Steve83 Posted November 11, 2018 Share Posted November 11, 2018 Had someone ask me for info on the engine compartment light, including the retainers for the wire loom. Check this out: Underhood/Engine Compartment Light. And, with the permission of our new member, Snow Monkey, I added his timing instructions to the IDI page: Engines/IDI Diesel. You can embed this link on that page if you want: https://supermotors.net/getfile/71664/thumbnail/reellight1.jpg Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 11, 2018 Author Share Posted November 11, 2018 You can embed this link on that page if you want: https://supermotors.net/getfile/71664/thumbnail/reellight1.jpg Thanks, Steve. Done. Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 11, 2018 Author Share Posted November 11, 2018 Thanks, Steve. Done. Also, I added a page for dome and cargo lamp info: Electrical/Lighting/Dome and Cargo Lamps. Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 13, 2018 Author Share Posted November 13, 2018 Also, I added a page for dome and cargo lamp info: Electrical/Lighting/Dome and Cargo Lamps. I put a ton of info on today regarding front axles. Covers all Bullnose F-Series and Bronco 4x4 front axles: Driveline/Axles & Differentials. It is a complex issue to work through, but the info is there - for the original axle on the truck. Also, I used several different methods of placing the parts list info on there, and I'd like feedback as to which list you like best. Link to comment Share on other sites More sharing options...
Steve83 Posted November 14, 2018 Share Posted November 14, 2018 I put a ton of info on today regarding front axles. Covers all Bullnose F-Series and Bronco 4x4 front axles: Driveline/Axles & Differentials. It is a complex issue to work through, but the info is there - for the original axle on the truck. Also, I used several different methods of placing the parts list info on there, and I'd like feedback as to which list you like best. The Dana website was the source for the list of BOMs in this caption: https://supermotors.net/getfile/544471/thumbnail/d44ifs96tag.jpg This is the link to the Dana (Axle Expert) site: https://www.expert.dana.com/expertforms/demenu.aspx (FIXED) Link to comment Share on other sites More sharing options...
grumpin Posted November 14, 2018 Share Posted November 14, 2018 I put a ton of info on today regarding front axles. Covers all Bullnose F-Series and Bronco 4x4 front axles: Driveline/Axles & Differentials. It is a complex issue to work through, but the info is there - for the original axle on the truck. Also, I used several different methods of placing the parts list info on there, and I'd like feedback as to which list you like best. Man, that's a lot of info.! I spent more time in 30.4 as that is where my truck axle is. After looking through them all, I liked 30.4 the best, I think. Link to comment Share on other sites More sharing options...
Recommended Posts