Rembrant Posted March 5, 2018 Share Posted March 5, 2018 Anyone able to take a photo of how it should look in the engine bay? I just recently removed all of this stuff from my 1984 302, so if there are any little obscure pieces that you need, I might still have 'em kickin' around. I didn't really take any pictures, but I had the one below showing the pump still intact a couple months ago. Link to comment Share on other sites More sharing options...
JMUBullnose Posted March 5, 2018 Author Share Posted March 5, 2018 Anyone able to take a photo of how it should look in the engine bay?I just recently removed all of this stuff from my 1984 302, so if there are any little obscure pieces that you need, I might still have 'em kickin' around.I didn't really take any pictures, but I had the one below showing the pump still intact a couple months ago.That'd be awesome! Thanks! I'm pretty sure I picked up the crossover pipe a few years ago, along with the check valve. I don't have the diverter though. What led you to remove it off your ride? "What GIS hath wrought, let no man, except management, tear asunder" - A. Wise Analyst On Mon, Mar 5, 2018 at 1:37 PM, Rembrant [via Bullnose Enthusiasts] <redacted_email_address> wrote: Link to comment Share on other sites More sharing options...
JMUBullnose Posted March 5, 2018 Author Share Posted March 5, 2018 I also wanted to ask - how hard was it to remove the crossover pipe? Looks like I'm missing the adjuster/tensioner bracket (9B452) and having a hard time sourcing the tubing (9B466) Link to comment Share on other sites More sharing options...
85lebaront2 Posted March 5, 2018 Share Posted March 5, 2018 Can we put them on the website w/o problems with Alldata? Yes, because the originals are Ford, and if I simply remove the AllData from the pictures they are just plain vacuum diagrams. It puts them out either printed or pdf format. Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 5, 2018 Share Posted March 5, 2018 Yes, because the originals are Ford, and if I simply remove the AllData from the pictures they are just plain vacuum diagrams. It puts them out either printed or pdf format. Bill - Perhaps you could send me the pdf's for our trucks? I could put them up on tabs for each engine. Thanks! And, I can trim them if that's easier for you. Link to comment Share on other sites More sharing options...
Rembrant Posted March 5, 2018 Share Posted March 5, 2018 I also wanted to ask - how hard was it to remove the crossover pipe? Looks like I'm missing the adjuster/tensioner bracket (9B452) and having a hard time sourcing the tubing (9B466) Which one is the crossover pipe? I tried to be careful removing all of this stuff, but the one line I did cut off was the pipe from the cat converter. I cut it off somewhere close to the exhaust manifold on the passenger side. What pieces do you need? I'll take some pictures of what I have tomorrow...I think all of the smog stuff is at work. I removed mine to clean up the engine bay, and simplify things. No smog checks required here on old "antique" vehicles. Link to comment Share on other sites More sharing options...
Rembrant Posted March 5, 2018 Share Posted March 5, 2018 I also wanted to ask - how hard was it to remove the crossover pipe? Looks like I'm missing the adjuster/tensioner bracket (9B452) and having a hard time sourcing the tubing (9B466) I have the bracket and the tubing. Let me know what else you might need. You're welcome to have it...might cost a few bucks to ship it. Link to comment Share on other sites More sharing options...
85lebaront2 Posted March 6, 2018 Share Posted March 6, 2018 Bill - Perhaps you could send me the pdf's for our trucks? I could put them up on tabs for each engine. Thanks! And, I can trim them if that's easier for you. I can do that, I don't know how far back the information goes though. Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 6, 2018 Share Posted March 6, 2018 I can do that, I don't know how far back the information goes though. Whatever you can do. Link to comment Share on other sites More sharing options...
85lebaront2 Posted March 6, 2018 Share Posted March 6, 2018 Whatever you can do. Check your inbox sir. Link to comment Share on other sites More sharing options...
Recommended Posts