kramttocs Posted June 28, 2020 Share Posted June 28, 2020 This setup came off my 1986 F250 460. The truck came from Washington and was registered/in use as of November 2018 when I purchased it. I removed the system in Feb 2019. While I never personally had it tested (we don't need to in Missouri) to my knowledge everything is in working condition. Sold as is just because I don't know how to verify it. The PO used the dealership for maintenance if that provides some assurance. Everything came off the truck without hassle, even the exhaust manifold tubes (I also have the manifolds still). The only issue I am aware of is one green vacuum line I broke when pulling the stuff out of the box for photos. There is an extra crossover tube that came from another truck I have. I haven't listed the individual components anywhere else yet as I'd prefer to sell as a bundle to someone here. Call me lazy I fully expect shipping to be around the $100 mark. UPDATE: The weight came out to 55 so using 60 for a buffer. I believe I can package it in a 24 x 15 x 12 box and still get padding in there. Shipping to Maine (just chose a random far state) FedEx was the cheapest with $108. I have a lot more photos that I can send anyone interested. PM me with your offer if interested. Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 28, 2020 Share Posted June 28, 2020 Scott - Did you see a calibration code on the valve cover? Or is there a sticker near the radiator support? I ask because I wonder if that's a California-spec system? Some of the West Coast trucks were made and sold in CA and had the CA spec's, even though registered in Oregon or Washington. Link to comment Share on other sites More sharing options...
kramttocs Posted June 29, 2020 Author Share Posted June 29, 2020 Scott - Did you see a calibration code on the valve cover? Or is there a sticker near the radiator support? I ask because I wonder if that's a California-spec system? Some of the West Coast trucks were made and sold in CA and had the CA spec's, even though registered in Oregon or Washington. Hey Gary, I don't believe it is. The core support has been blasted/coated and the builder took the liberty of spray painting my valve covers blue.. I do have photos and videos I could look through but I am 99% sure I didn't see anything unusual. The truck was bought from a WA dealership and lived it's whole life in something like a 100 mile radius until I shipped it to Mo. Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 29, 2020 Share Posted June 29, 2020 Hey Gary, I don't believe it is. The core support has been blasted/coated and the builder took the liberty of spray painting my valve covers blue.. I do have photos and videos I could look through but I am 99% sure I didn't see anything unusual. The truck was bought from a WA dealership and lived it's whole life in something like a 100 mile radius until I shipped it to Mo. Then it should be the 48 State package. Link to comment Share on other sites More sharing options...
JerseyDave Posted June 29, 2020 Share Posted June 29, 2020 Hey, Im interested. Im not sure what the value should be but Im interested. I have a 1985 F250 and it seems like your emissions setup seems to match mine pretty well. Do you have any idea what your interested in getting? Dave PS - Sorry Im posting in the thread but I kept getting error messages when I sent this personally. Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 29, 2020 Share Posted June 29, 2020 Hey, Im interested. Im not sure what the value should be but Im interested. I have a 1985 F250 and it seems like your emissions setup seems to match mine pretty well. Do you have any idea what your interested in getting? Dave PS - Sorry Im posting in the thread but I kept getting error messages when I sent this personally. Dave - Are you trying to email this way? 1. Click on the "kramttocs" above his avatar 2. Click on "Send email to kramttocs 3. Fill out the form and click "I'm not a robot" If that's what you are trying and it isn't working then please show me screen shots of what errors you are getting. Link to comment Share on other sites More sharing options...
JerseyDave Posted June 29, 2020 Share Posted June 29, 2020 Dave - Are you trying to email this way? 1. Click on the "kramttocs" above his avatar 2. Click on "Send email to kramttocs 3. Fill out the form and click "I'm not a robot" If that's what you are trying and it isn't working then please show me screen shots of what errors you are getting. Hey Gary, Thanks. Yes I am following those steps. It allows me to send then I get a message like this: Undelivered Mail Returned to Sender This is the mail system at host n8.nabble.com. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system Link to comment Share on other sites More sharing options...
kramttocs Posted June 29, 2020 Author Share Posted June 29, 2020 Hey Gary, Thanks. Yes I am following those steps. It allows me to send then I get a message like this: Undelivered Mail Returned to Sender This is the mail system at host n8.nabble.com. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system Hey Dave - just sent you an email so let's see if that works. I have updated the first post with more accurate shipping information. Link to comment Share on other sites More sharing options...
Recommended Posts