kramttocs Posted June 20, 2020 Share Posted June 20, 2020 For details see: https://www.lmctruck.com/1980-96-ford/door-glass-parts/power-window-kit This came out of my 86 F250. The power windows worked as expected although full disclosure that I only had the truck for a winter before I tore it down so I didn't use them much (but it was cold and they performed like normal power windows). I didn't know the lock actuators were in there until I got into the door. Best guess is they had keyless entry for them at some point as I do NOT have switches or any significant wiring for the locks. I tested all 4 and they all work and sound as you'd expect. Comes with what you see. I lost or tossed some of the sheet metal screws. I suspect this must be an early model of the lmc kit linked to. The handle covers are tan but could use a repaint. Asking $40 plus shipping. Happy to provide any additional information. Also note that if you want to install factory style switches but not do the full factory harness/regulator swap, you could easily wire them up to these. Link to comment Share on other sites More sharing options...
Pete Whitstone Posted June 24, 2020 Share Posted June 24, 2020 I'll snag all this. I'll see if I can figure out how to send a direct message to you. Link to comment Share on other sites More sharing options...
kramttocs Posted June 24, 2020 Author Share Posted June 24, 2020 I'll snag all this. I'll see if I can figure out how to send a direct message to you. On its way. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts