Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 e3tz7k509a is the Ford p/nOkay perfect! I imagine that will fit in an envelope would it not? Sent from my iPhone > On May 17, 2020, at 7:26 PM, ArdWrknTrk [via Bullnose Enthusiasts] wrote:>> e3tz7k509a Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 17, 2020 Share Posted May 17, 2020 Yes, it should fit in an envelope. Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 Yes, it should fit in an envelope.Okay shoot me your PayPal address once you get a total and I’ll get your money to yah !! Sent from my iPhone Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 Hopefully get the steering column fixed up tomorrow and get these column bearings in from drb machine and fab!! Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 17, 2020 Share Posted May 17, 2020 Will do. I'll find it tomorrow and see if I can get it out. But it may be Tuesday. You have bolts? I don't have the ones that were in it, but could send some. However, it'll be less expensive to ship w/o. Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 17, 2020 Author Share Posted May 17, 2020 Will do. I'll find it tomorrow and see if I can get it out. But it may be Tuesday. You have bolts? I don't have the ones that were in it, but could send some. However, it'll be less expensive to ship w/o. They should likely be just standard bolts. We got bolts at work if I had the dimensions needed Link to comment Share on other sites More sharing options...
salans7 Posted May 17, 2020 Share Posted May 17, 2020 They should likely be just standard bolts. We got bolts at work if I had the dimensions needed For what it's worth, the big brace is only available used, or occasionally somebody will have a NOS one up on Ebay or the Facebook groups. Nobody is currently making them new as of 5/17/2020. Terrapin MFG was making new ones, but they closed their doors. I suspect Bronco Graveyard was getting their product from Terrapin, but since he shut down, they're out of stock (they don't update the site) and can only get more if somebody else starts making them. I have the lower bearing retainer from DRB in my truck as well and I can't wait to test it out. Link to comment Share on other sites More sharing options...
Rembrant Posted May 18, 2020 Share Posted May 18, 2020 For what it's worth, the big brace is only available used, or occasionally somebody will have a NOS one up on Ebay or the Facebook groups. Nobody is currently making them new as of 5/17/2020. Terrapin MFG was making new ones, but they closed their doors. I suspect Bronco Graveyard was getting their product from Terrapin, but since he shut down, they're out of stock (they don't update the site) and can only get more if somebody else starts making them. I have the lower bearing retainer from DRB in my truck as well and I can't wait to test it out. I saw Jason comment on FB just a few days and I thought he said he wasn’t making them for JBG. He said JBG basically pushed him out of the market and he was only selling 30-40 braces per year. He must have been selling a lot of them before JBG got into it. Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 18, 2020 Share Posted May 18, 2020 I saw Jason comment on FB just a few days and I thought he said he wasn’t making them for JBG. He said JBG basically pushed him out of the market and he was only selling 30-40 braces per year. He must have been selling a lot of them before JBG got into it. This is something we need our new LMC friend, Keith, to look into. I'll ping him. Link to comment Share on other sites More sharing options...
Chris Guthro Posted May 18, 2020 Author Share Posted May 18, 2020 Thanks for the info guys! I’ll try the little brace first since the cabs in good shape. I’d like to get the big bracket tho for the pull truck since that’s taking a good size beating haha Link to comment Share on other sites More sharing options...
Recommended Posts