Gary Lewis Posted February 20, 2018 Share Posted February 20, 2018 My bull bar indeed measures 34" between the uprights. And it is a perfect fit on a front bumper. But Dad's frame measures 40" outside/outside, so these bars don't mount to the frame. Look at the pic of Jerry's and you'll see some hardware at the bottom. I'll ask him for some pics to clarify. I'm posting this for Bill: Gary, I was just trying to post a picture showing where the brushguard mounted on Darth and the picture uploader would not work, first it gave me a message of an invalid URL, then would not even open to browse. ??? Here is the picture, you can see from the rust stains where the unit attached, essentially right over the frame ends. Link to comment Share on other sites More sharing options...
85lebaront2 Posted February 21, 2018 Share Posted February 21, 2018 I'm posting this for Bill: Gary, I was just trying to post a picture showing where the brushguard mounted on Darth and the picture uploader would not work, first it gave me a message of an invalid URL, then would not even open to browse. ??? Here is the picture, you can see from the rust stains where the unit attached, essentially right over the frame ends. The purpose in sending it to you was to give you and others an idea where they mounted. Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 21, 2018 Share Posted February 21, 2018 The purpose in sending it to you was to give you and others an idea where they mounted. Yep, I can see where it was, and the bolts to which it attached. Or, were you suggesting that the shown engine oil cooler would work on the power steering? Link to comment Share on other sites More sharing options...
85lebaront2 Posted February 21, 2018 Share Posted February 21, 2018 Yep, I can see where it was, and the bolts to which it attached. Or, were you suggesting that the shown engine oil cooler would work on the power steering? It might, that is the factory auxiliary transmission cooler for the original C6. I am still using one on the E4OD. Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 21, 2018 Share Posted February 21, 2018 It might, that is the factory auxiliary transmission cooler for the original C6. I am still using one on the E4OD. THAT'S what that is! I have one from Huck for the E4OD going in Dad's truck. Link to comment Share on other sites More sharing options...
reamer Posted February 21, 2018 Author Share Posted February 21, 2018 THAT'S what that is! I have one from Huck for the E4OD going in Dad's truck. So yours mounts to the inside of the frame rails? there must be a set of "3-inch spacers" in order to mount to the rails? Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 21, 2018 Share Posted February 21, 2018 So yours mounts to the inside of the frame rails? there must be a set of "3-inch spacers" in order to mount to the rails? Ron - Were you saying that to Bill or me? Link to comment Share on other sites More sharing options...
reamer Posted February 21, 2018 Author Share Posted February 21, 2018 Ron - Were you saying that to Bill or me? Gary, to yous:nabble_smiley_beam: Link to comment Share on other sites More sharing options...
85lebaront2 Posted February 21, 2018 Share Posted February 21, 2018 So yours mounts to the inside of the frame rails? there must be a set of "3-inch spacers" in order to mount to the rails? Ron, if that message was for me, first the picture was taken after I changed the front sheet metal and before I got the bumper off. The guard used the two lower bumper bolt holes if I remember correctly (it's been close to 7 years ago I removed it) and had fairly heavy hooks (flat bar bent to go over the bumper and bolt to the vertical portion). The lower may have had a fixed hook on it. The vertical pieces were probably 1 1/2 - 2" across the back and open inside. Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 22, 2018 Share Posted February 22, 2018 Gary, to yous:nabble_smiley_beam: Ron - Tomorrow I'll go look to see if I have the hardware which mounts the bar. I tend to remember there being some but haven't seen it of late. Link to comment Share on other sites More sharing options...
Recommended Posts