1986F150Six Posted March 17, 2020 Share Posted March 17, 2020 Good price. https://www.ebay.com/itm/UHR330-Power-Steering-Pump-for-Ford-1987-to-1990-F350-E350-E2UZ3A674AX/201653340417?hash=item2ef379c901:g:z1cAAOSw4E5eZmEW Link to comment Share on other sites More sharing options...
Vic Roma Posted March 18, 2020 Share Posted March 18, 2020 Is this the same as what some of you have? Other than it being for 87 onwards. I’ve seen some new ones online, so is it worth buying new or are the early 80s JY finds including brackets etc. the correct part for our trucks? Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 18, 2020 Share Posted March 18, 2020 Is this the same as what some of you have? Other than it being for 87 onwards. I’ve seen some new ones online, so is it worth buying new or are the early 80s JY finds including brackets etc. the correct part for our trucks? Vic - You can't run a Saginaw pump on these trucks w/o getting the right brackets. And the best source for those is on the E-series vans, which did run the Saginaws. As for this being the same pump, yes. But it may be slight different in the accessories. For instance, I note that the return for this one points down at ~6:00 where one of mine points at about 10:00 and another points at about 8:00. That is all application-dependent. And, there are differences in the pressure valve included, and that's something I have no way to quantify. But I can say that those who have swapped a Sag from an E-series van into these trucks have found them to work quite well. What are the differences? One is a quieter pump - where the C-II that comes on the F-Series trucks growls and whines, the Saginaws are quiet. Another is that the Sags don't puke fluid if you turn the wheels with the engine off. But maybe best, they are said to give a better "feel" to the steering. Link to comment Share on other sites More sharing options...
Recommended Posts