The95FordGuy Posted February 19, 2020 Share Posted February 19, 2020 Hello! My name is Tommy. I own a 95 F150 with a 4.9 which I’ve had for 15+ years. I’m currently working on a 78 Bronco for a friend. It has a 460 ci engine and C6 transmission. The engine I believe is from a truck since the vin indicates this bronco actually came with a 351m. It has factory air conditioning as well. Thanks! Link to comment Share on other sites More sharing options...
grumpin Posted February 19, 2020 Share Posted February 19, 2020 Welcome! Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 19, 2020 Share Posted February 19, 2020 Welcome, Tommy! Glad you joined. Where's home? I ask because we have a map (Bullnose Forum/Member's Map in the menu) and I'd be happy to add you if I had a town. Were you the one wanting a Saginaw bracket for a 460? A '78 Bronco would be cool. And while both it and the '95 are a bit out of our area of expertise, we welcome all members. Link to comment Share on other sites More sharing options...
fords4life Posted February 19, 2020 Share Posted February 19, 2020 Welcome, Tommy! Glad you joined. Where's home? I ask because we have a map (Bullnose Forum/Member's Map in the menu) and I'd be happy to add you if I had a town. Were you the one wanting a Saginaw bracket for a 460? A '78 Bronco would be cool. And while both it and the '95 are a bit out of our area of expertise, we welcome all members. Welcome! Link to comment Share on other sites More sharing options...
The95FordGuy Posted February 19, 2020 Author Share Posted February 19, 2020 Welcome, Tommy! Glad you joined. Where's home? I ask because we have a map (Bullnose Forum/Member's Map in the menu) and I'd be happy to add you if I had a town. Were you the one wanting a Saginaw bracket for a 460? A '78 Bronco would be cool. And while both it and the '95 are a bit out of our area of expertise, we welcome all members. Thanks for welcoming me! I live in Goodlettsville, TN just outside of Nashville. I’m still searching for one of the power steering brackets for a 83-87 truck with a 460. I appreciate the help even though this isn’t a bullnose project. The information provided in the 460 saginaw discussion has been extremely helpful and virtually the only real information I’ve been able find up to this point regarding this topic so thank you! If anyone has any suggestions that can help me track down the 3C511 bracket for a 460 I believe that will be the last piece of the puzzle. It seems to be almost impossible to find. I’ve searched ebay and online junkyard inventories but haven’t had any luck. Thanks again! Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 19, 2020 Share Posted February 19, 2020 Thanks for welcoming me! I live in Goodlettsville, TN just outside of Nashville. I’m still searching for one of the power steering brackets for a 83-87 truck with a 460. I appreciate the help even though this isn’t a bullnose project. The information provided in the 460 saginaw discussion has been extremely helpful and virtually the only real information I’ve been able find up to this point regarding this topic so thank you! If anyone has any suggestions that can help me track down the 3C511 bracket for a 460 I believe that will be the last piece of the puzzle. It seems to be almost impossible to find. I’ve searched ebay and online junkyard inventories but haven’t had any luck. Thanks again! First, you are now on the map. As for the bracket, 3C511 is the generic part number for a power steering bracket on every Ford vehicle in the world. You need a prefix, like E7TZ, and a suffix, like E, to go with that to create the full part number. You can see that, sort of, in the illustration below that shows serpentine installations of the power steering pumps - both the F-Series and the E-Series brackets are 3C511, but they are clearly different as the pickups are shown with a C-II pump and the vans with a Saginaw. HOWEVER, I cannot give you the full part number as there seems to be a glitch in the master parts catalog - unless I'm blind. I'll post the whole section from the MPC below the illustration so maybe someone can see it. But I think you are looking for a bracket from an '88 or later E-series van with a 460 and A/C and I'm not seeing it. Link to comment Share on other sites More sharing options...
The95FordGuy Posted February 20, 2020 Author Share Posted February 20, 2020 First, you are now on the map.As for the bracket, 3C511 is the generic part number for a power steering bracket on every Ford vehicle in the world. You need a prefix, like E7TZ, and a suffix, like E, to go with that to create the full part number. You can see that, sort of, in the illustration below that shows serpentine installations of the power steering pumps - both the F-Series and the E-Series brackets are 3C511, but they are clearly different as the pickups are shown with a C-II pump and the vans with a Saginaw.HOWEVER, I cannot give you the full part number as there seems to be a glitch in the master parts catalog - unless I'm blind. I'll post the whole section from the MPC below the illustration so maybe someone can see it. But I think you are looking for a bracket from an '88 or later E-series van with a 460 and A/C and I'm not seeing it. Thanks for the info on the part numbers. Makes a lot more sense now. I was hoping to find the steel bracket from an earlier model instead of the chunky aluminum ones. I’ll attach the picture I saved from the earlier discussion originally posted by ArdWrknTrk. I have circled what I believe to be the elusive bracket I need. Sent from my iPhone Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 20, 2020 Share Posted February 20, 2020 Ahhh! You are going with a vee belt rather than poly groove. Then this is the drawing for you. The part # and applications are: Link to comment Share on other sites More sharing options...
The95FordGuy Posted February 20, 2020 Author Share Posted February 20, 2020 Ahhh! You are going with a vee belt rather than poly groove. Then this is the drawing for you. The part # and applications are:Thanks Gary! I just put that part number in google and still no luck. I did find a bracket from bronco graveyard that looks close. Has anyone had any luck with this one? It says its for 1980-88 Ford truck/bronco with 429/460 without EFI, which on paper sounds like exactly what I need but the picture obviously looks a bit different than the original. It definitely seems close. Thoughts? Sent from my iPhone Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 20, 2020 Share Posted February 20, 2020 I just realized that the E3TZ 3C511-D also fits an 83 - 86 w/a 460 w/o A/C. That would be a carb'd 460, so maybe the bracket you found will fit? Make sure you can return it if not. Link to comment Share on other sites More sharing options...
Recommended Posts