Jolene82 Posted February 18, 2020 Share Posted February 18, 2020 Hey there, I have the dash removed from my 82 and would like to replace all my vacuum lines while it's off. Previous owner cut some of the lines under the dash and I'm unsure where they go. Any guides out there for the vacuum lines under the dash? Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 18, 2020 Share Posted February 18, 2020 Welcome to the forum. My email to you asked that you "go to the New Members Start Here folder, read the guidelines, and then start a new thread/topic in that folder about yourself and your truck." The reason for asking that of you is so that you have a chance to read the guidelines because you will be held to them. So please go do that. As for the vacuum lines, you haven't told us anything about your truck other than it is an '82. With vacuum lines under the dash I will assume that it has factory A/C. In that case the 1981 EVTM is probably what you need. It is located here: Documentation/Electrical/EVTM/1981 EVTM. Toward the bottom you'll see a section on Heating, Ventilation, and A/C. And a bit farther down there's Vacuum Distribution that might help. Link to comment Share on other sites More sharing options...
Recommended Posts