Jump to content
Bullnose Forums

Cruise control kit [E4TZ-9A818-A] - NOS


Recommended Posts

Man, you are on a roll!!!

84/87 E-F-U150/350 E4TZ 9A818-A Electronic - w/M/T also use 9A819

84/87 B-R 4&6 AH Electronic

Includes the following details which are also available as loose service items

1-E4AZ 9E731-A Sensor assy. 1-E4AZ 9C735-B Servo 1-E4AZ 9D757-A Regulator

1-E4AZ 9E799-A Reservoir 1-E4AZ 9A840-A Wiring Harness assy.

1-E4TZ 9C888-A Switch engagement

Balance of components are to be improvised, or if unable, procure from Specific Cruise System, Inc.

Since all applications do not use a valve body (9C727);

it is not included in kit. Refer 9C727 in normal area of catalog.

Link to comment
Share on other sites

Man, you are on a roll!!!

84/87 E-F-U150/350 E4TZ 9A818-A Electronic - w/M/T also use 9A819

84/87 B-R 4&6 AH Electronic

Includes the following details which are also available as loose service items

1-E4AZ 9E731-A Sensor assy. 1-E4AZ 9C735-B Servo 1-E4AZ 9D757-A Regulator

1-E4AZ 9E799-A Reservoir 1-E4AZ 9A840-A Wiring Harness assy.

1-E4TZ 9C888-A Switch engagement

Balance of components are to be improvised, or if unable, procure from Specific Cruise System, Inc.

Since all applications do not use a valve body (9C727);

it is not included in kit. Refer 9C727 in normal area of catalog.

I wonder how hard the 9A819 piece is to find. Would be sweet to add to my rebuild when it's finished.

Link to comment
Share on other sites

Man, you are on a roll!!!

84/87 E-F-U150/350 E4TZ 9A818-A Electronic - w/M/T also use 9A819

84/87 B-R 4&6 AH Electronic

Includes the following details which are also available as loose service items

1-E4AZ 9E731-A Sensor assy. 1-E4AZ 9C735-B Servo 1-E4AZ 9D757-A Regulator

1-E4AZ 9E799-A Reservoir 1-E4AZ 9A840-A Wiring Harness assy.

1-E4TZ 9C888-A Switch engagement

Balance of components are to be improvised, or if unable, procure from Specific Cruise System, Inc.

Since all applications do not use a valve body (9C727);

it is not included in kit. Refer 9C727 in normal area of catalog.

I wonder how hard the 9A819 piece is to find. Would be sweet to add to my rebuild when it's finished.

It's sold.....:nabble_smiley_whistling:

I went ahead and pulled the trigger on it. :nabble_anim_claps:

Gary - Any chance you could confirm if the 9A819 is an E4TZ OR E4AZ?

Link to comment
Share on other sites

It's sold.....:nabble_smiley_whistling:

I went ahead and pulled the trigger on it. :nabble_anim_claps:

Gary - Any chance you could confirm if the 9A819 is an E4TZ OR E4AZ?

The 9A819 is the clutch switch, right?

I was looking at this kit a while back, and I believe there were all kinds of these switches on Ebay as the same ones were used on the Mustangs?

If you have a manual trans truck with hydraulic clutch, you could buy one of the factory cruise clutch switches that are on Ebay...there are several, as I just bought one the other day. If you have the pedal assembly for it, then you already have a mounting bracket for the switch. That is, assuming the wiring logic is the same...and I assume it is.

 

Link to comment
Share on other sites

×
×
  • Create New...