Jcris Posted January 11, 2018 Share Posted January 11, 2018 Hello. My name is John Cris and I'm living in Monterey, Ca. I'm retired and spend some time wrenching and sometimes even enjoying working on cars/trucks. Especially when a family member gets stuck. Last year I began working on my brother-in-laws 86 F150. It had been sitting under a tree in his front yard for a few years and was going nowhere unless I took an interest. It's a 4x4 with a 302 or 351 with an automatic trans. It needed all kinds of love which I was willing to give but of late I've run into a stumbling block. And so I googled it and here I am. I've wrenched all my life, most of the time to save a buck but also because a fair amount of automotive repair is very straight forward. I can handle the easier stuff and leave the real problems for the pro's. For me, these types of forums can help bridge the gap between the easy stuff and more difficult troubleshooting. My background is in construction with a lot of time spent in commercial plumbing and electrical. I've never rebuilt a motor or transmission but have done most things in between. I will post more about the 86' in another message and will be actively reading along. My best to the group in this new year, Jcris Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 11, 2018 Share Posted January 11, 2018 John - Welcome to the Bullnose Forum! I, too, am retired, albeit from IT in my case. And, I've wrenched all my life, but am learning that in this phase of my life if I want to get things done more quickly I'll farm them out. Like paint/body work, engine and tranny building, etc. But, there are sooooo many things I want to do on my trucks that aren't reasonable to farm out, so I get a bit involved. Link to comment Share on other sites More sharing options...
Recommended Posts