Machspeed Posted April 3, 2021 Share Posted April 3, 2021 That's got to be frustrating! Hopefully you won't have to deal with fuel systems issues for another 40 years. If the winds stay calm(ish) today I hope to get my bumper off and bed corner replaced. Last weekend's plan got undermined by more pressing repairs of an incredibly crusty, leaking well pressure switch and a fence that got blown down. Lot's of little stuff done today but for the most part, got much of my interior installed. Dash pad just set on top and not screwed down yet. May have to go back in there. I still need to paint the door panels but I'm not quite ready to pull them. Everything else has been painted with Vinyl Pro's SEM Paint. As has been mentioned here, it is great product. Link to comment Share on other sites More sharing options...
Gary Lewis Posted April 3, 2021 Author Share Posted April 3, 2021 Lot's of little stuff done today but for the most part, got much of my interior installed. Dash pad just set on top and not screwed down yet. May have to go back in there. I still need to paint the door panels but I'm not quite ready to pull them. Everything else has been painted with Vinyl Pro's SEM Paint. As has been mentioned here, it is great product. Replaced the sagging visors with later model units, also painted with SEM. Fixed and cleaned up the interior map light, also adding new cover and LED bulbs. Much brighter now! Added custom console and new mats which I got for Christmas this past year. Just a few small things left to do inside and I'll have it where I want it. Looks really GOOD, John! Those kinds of things make it much more pleasant to drive. Link to comment Share on other sites More sharing options...
kramttocs Posted April 3, 2021 Share Posted April 3, 2021 Looks really GOOD, John! Those kinds of things make it much more pleasant to drive. Well done! Really like the saddle blanket cover and the 4wd shifter buddy Link to comment Share on other sites More sharing options...
scbill Posted April 3, 2021 Share Posted April 3, 2021 Well done! Really like the saddle blanket cover and the 4wd shifter buddy Doncha just love it when a plan comes together !! Lookin good. Link to comment Share on other sites More sharing options...
grumpin Posted April 4, 2021 Share Posted April 4, 2021 Doncha just love it when a plan comes together !! Lookin good. Good job! Link to comment Share on other sites More sharing options...
tommyg Posted April 5, 2021 Share Posted April 5, 2021 Lot's of little stuff done today but for the most part, got much of my interior installed. Dash pad just set on top and not screwed down yet. May have to go back in there. I still need to paint the door panels but I'm not quite ready to pull them. Everything else has been painted with Vinyl Pro's SEM Paint. As has been mentioned here, it is great product. Replaced the sagging visors with later model units, also painted with SEM. Fixed and cleaned up the interior map light, also adding new cover and LED bulbs. Much brighter now! Added custom console and new mats which I got for Christmas this past year. Just a few small things left to do inside and I'll have it where I want it. Wow! Great job! I'm saying with jealousy as I think about what a mess my interior is and how expensive all those plastic parts are.... Link to comment Share on other sites More sharing options...
Gsmblue Posted April 6, 2021 Share Posted April 6, 2021 Wow! Great job! I'm saying with jealousy as I think about what a mess my interior is and how expensive all those plastic parts are.... First round of parts purchased for Elyza (F350): Horn PIAA 330Hz/400Hz Valve cover gaskets Front window and door seals Door pockets Passanger front fender emblems. Espy in shop getting engine torn down. Link to comment Share on other sites More sharing options...
Gary Lewis Posted April 6, 2021 Author Share Posted April 6, 2021 First round of parts purchased for Elyza (F350): Horn PIAA 330Hz/400Hz Valve cover gaskets Front window and door seals Door pockets Passanger front fender emblems. Espy in shop getting engine torn down. You are a busy boy! Lots of Bullnosing going on. Link to comment Share on other sites More sharing options...
scbill Posted April 6, 2021 Share Posted April 6, 2021 You are a busy boy! Lots of Bullnosing going on. Got the shift indicator in today, also the gauge regulator, and speedo w/ trip reset. I need to know what the in/out voltage on the regulator is supposed to be. 95% full fuel, 50 psi oil@ 500rpm as per mechanical gauge. The regulator is wired as per instructions on Gary's writeup. I'm thinking the amp,and oil are the only properly working gauges. Fuel,oil,temp were at zero before. FWIW, temp sender ohms changes with engine heat change. Bill Link to comment Share on other sites More sharing options...
Machspeed Posted April 6, 2021 Share Posted April 6, 2021 First round of parts purchased for Elyza (F350): Horn PIAA 330Hz/400Hz Valve cover gaskets Front window and door seals Door pockets Passanger front fender emblems. Espy in shop getting engine torn down. Is that door glass you purchased? If so, can I ask where you acquired it from and are you pleased with it. Also, who is the maker of the door seals you purchased from? Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts