Jump to content
Bullnose Forum

Eastwood rust converter and rust encapsulator


Whisler

Recommended Posts

Use Master Series Silver. I have been using it for 20 years or more now. It is the material you want to use.

Thanks for the reply. I checked out their website and the MasterSeries Silver looks like a good product. I know that moisture cure urethane is a very tight film.

How is the adhesion over rusty metal? I live in KY and we are part of the rust belt due to salt on the roads in winter. Also this truck was previously used as a plow truck with a salt spreader on the back which makes things worse. I plan on removing as much rust as I can manually but wire brush on a drill will be about the best I can do as I don't have the resources to remove the bed.

I have a new bed being prepped by a friend but his shop is 50 miles away and I would like to treat the frame before I drive down there to install the new bed. We are both old guys and can't work 10-12 hour days like we used to.

Thanks for any additional info.

Link to comment
Share on other sites

Thanks for the reply. I checked out their website and the MasterSeries Silver looks like a good product. I know that moisture cure urethane is a very tight film.

How is the adhesion over rusty metal? I live in KY and we are part of the rust belt due to salt on the roads in winter. Also this truck was previously used as a plow truck with a salt spreader on the back which makes things worse. I plan on removing as much rust as I can manually but wire brush on a drill will be about the best I can do as I don't have the resources to remove the bed.

I have a new bed being prepped by a friend but his shop is 50 miles away and I would like to treat the frame before I drive down there to install the new bed. We are both old guys and can't work 10-12 hour days like we used to.

Thanks for any additional info.

I can't speak for MasterSeries as I've not used it, but I believe it is pretty much the same as POR15 with respect to adherence to rust. If you get any loose rust off and the remaining rust is clean a moisture-cure urethane will bond to it forever. There is no getting it off, at least not mechanically. In fact, it adheres better to rusty metal than to bare metal.

But you want that rust to be part of the truck, not loose and ready to fall off. So wire brushing or sanding is good prep. In fact, the scratch marks from sanding provide extra "tooth" for the paint to adhere to.

Link to comment
Share on other sites

I can't speak for MasterSeries as I've not used it, but I believe it is pretty much the same as POR15 with respect to adherence to rust. If you get any loose rust off and the remaining rust is clean a moisture-cure urethane will bond to it forever. There is no getting it off, at least not mechanically. In fact, it adheres better to rusty metal than to bare metal.

But you want that rust to be part of the truck, not loose and ready to fall off. So wire brushing or sanding is good prep. In fact, the scratch marks from sanding provide extra "tooth" for the paint to adhere to.

It's all I use for rust (the encapsulator) and have been really happy with it

Link to comment
Share on other sites

Thanks for the reply. I checked out their website and the MasterSeries Silver looks like a good product. I know that moisture cure urethane is a very tight film.

How is the adhesion over rusty metal? I live in KY and we are part of the rust belt due to salt on the roads in winter. Also this truck was previously used as a plow truck with a salt spreader on the back which makes things worse. I plan on removing as much rust as I can manually but wire brush on a drill will be about the best I can do as I don't have the resources to remove the bed.

I have a new bed being prepped by a friend but his shop is 50 miles away and I would like to treat the frame before I drive down there to install the new bed. We are both old guys and can't work 10-12 hour days like we used to.

Thanks for any additional info.

I suggest this, because I have been using as I said for so long. I restore professionally. This is my product of choice. If you google me and master series, you will find lot of info to read if you need to do that. Just buy it.

Link to comment
Share on other sites

I can't speak for MasterSeries as I've not used it, but I believe it is pretty much the same as POR15 with respect to adherence to rust. If you get any loose rust off and the remaining rust is clean a moisture-cure urethane will bond to it forever. There is no getting it off, at least not mechanically. In fact, it adheres better to rusty metal than to bare metal.

But you want that rust to be part of the truck, not loose and ready to fall off. So wire brushing or sanding is good prep. In fact, the scratch marks from sanding provide extra "tooth" for the paint to adhere to.

Gary, I mentioned to you before, it is different than POR. I hate POR. Its adhesion is poor. I have seen it peel off in sheets. Master Series is moisture cured like POR, but Master Series Silver is not the same product as POR.

Link to comment
Share on other sites

Gary, I mentioned to you before, it is different than POR. I hate POR. Its adhesion is poor. I have seen it peel off in sheets. Master Series is moisture cured like POR, but Master Series Silver is not the same product as POR.

Thanks all for the responses. I think I will give the MasterSeries Silver a try.

Link to comment
Share on other sites

Gary, I mentioned to you before, it is different than POR. I hate POR. Its adhesion is poor. I have seen it peel off in sheets. Master Series is moisture cured like POR, but Master Series Silver is not the same product as POR.

Pete - What I said was "I believe it is pretty much the same as POR15 with respect to adherence to rust." I am in no way saying they are the same product. But they do both adhere extremely well to rust. Or, maybe I should say that I know POR15 does, and can only assume MS does from what you've said.

I'm not at all pushing POR15. MS may very well be better. But I've used POR15 many times and with proper preparation it adheres well.

When I run out of POR I'll probably buy some MS just to find out for myself. But so far the POR has not let me down. And since I have quite a supply it'll be some time before I run out.

Link to comment
Share on other sites

×
×
  • Create New...