grumpin Posted March 22, 2019 Share Posted March 22, 2019 When is Bullnose season in Oregon; what's the daily bag limit; and how much is an out-of-state license? Yesterday, I built something else that can be used for lifting... https://supermotors.net/getfile/1146887/thumbnail/20190321_212126.jpg It's not finished, but it's still strong enough for my ~240 lbs to hang from it. The season is year round. Although summer months are preferred by some, me. As it's easier to go through my favorite pick n pull for extra goodies on dry ground. The daily limit is how many you can push, pull, tow or haul without getting stopped by the "man". The out of state license is $100, and I have assigned myself to collect those fees and disperse them as needed. Edit: Nice lift! Link to comment Share on other sites More sharing options...
Steve83 Posted July 13, 2019 Share Posted July 13, 2019 I hope you can! I think you'll love it. Mine is going to be used for exactly what you mentioned - lifting bodies off of frames. Once the driveline is in Dad's truck I'm going to chock the wheels to ensure no movement, lift the cab off, install the engine & tranny, and then lower the cab back in place. What is the "refrigeration machine"? I've been hemming & hawing about switching it to symmetric (so it wouldn't straddle the floor drain), but I'd never find another set of arms that I could afford, so I bolted it down asymmetric (like it was). The anchor bolts go deeper than the drain, so they should be good. https://supermotors.net/getfile/1151317/thumbnail/20190707_235423.jpg It's adjusted & works, but I can't really use it until I roll the '93EB chassis out, and put the tub on a trailer. But since I can't afford paint yet, I'm not looking forward to leaving the tub outdoors. Or the chassis. Link to comment Share on other sites More sharing options...
grumpin Posted July 16, 2019 Share Posted July 16, 2019 I've been hemming & hawing about switching it to symmetric (so it wouldn't straddle the floor drain), but I'd never find another set of arms that I could afford, so I bolted it down asymmetric (like it was). The anchor bolts go deeper than the drain, so they should be good. https://supermotors.net/getfile/1151317/thumbnail/20190707_235423.jpg It's adjusted & works, but I can't really use it until I roll the '93EB chassis out, and put the tub on a trailer. But since I can't afford paint yet, I'm not looking forward to leaving the tub outdoors. Or the chassis. Link to comment Share on other sites More sharing options...
Steve83 Posted July 25, 2019 Share Posted July 25, 2019 I've been hemming & hawing about switching it to symmetric (so it wouldn't straddle the floor drain), but I'd never find another set of arms that I could afford, so I bolted it down asymmetric (like it was). The anchor bolts go deeper than the drain, so they should be good. https://supermotors.net/getfile/1151317/thumbnail/20190707_235423.jpg It's adjusted & works, but I can't really use it until I roll the '93EB chassis out, and put the tub on a trailer. But since I can't afford paint yet, I'm not looking forward to leaving the tub outdoors. Or the chassis. Getting the bay empty turned out to be less-painful than I expected, so now I can find out if my anchor bolts are actually deep enough... https://supermotors.net/getfile/1151935/thumbnail/20190724_203405.jpg Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 25, 2019 Author Share Posted July 25, 2019 Getting the bay empty turned out to be less-painful than I expected, so now I can find out if my anchor bolts are actually deep enough... https://supermotors.net/getfile/1151935/thumbnail/20190724_203405.jpg Time for a trial!!! Link to comment Share on other sites More sharing options...
Steve83 Posted July 27, 2019 Share Posted July 27, 2019 Time for a trial!!! Not much weight, but it works. https://supermotors.net/getfile/1151987/thumbnail/20190726_104808.jpg Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 27, 2019 Author Share Posted July 27, 2019 Not much weight, but it works. https://supermotors.net/getfile/1151987/thumbnail/20190726_104808.jpg Cool! Congrat's!!!! Link to comment Share on other sites More sharing options...
Recommended Posts