Von1970ls5 Posted September 2, 2019 Share Posted September 2, 2019 I need the left and right front plastic inner fenders for my 1986 Ford F-250, I went to my local Dealer and was told they were discontinued. One of mine is cracked so I want to replace both. If anyone knows where I can buy them it is appreciated. Dave in Miami Lakes 1970ls5@bellsouth.net Link to comment Share on other sites More sharing options...
grumpin Posted September 2, 2019 Share Posted September 2, 2019 http://www.lmctruck.com/icatalog/fd/full.aspx?Page=14 These work? Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 2, 2019 Share Posted September 2, 2019 Dave - They varied a bit through the years and by application, as you can see on the page Underhood/Fender Aprons in the menu. However, the later you go the more holes in them, so you'd be fine with about any of them and use yours as templates for where to put the holes. Link to comment Share on other sites More sharing options...
Von1970ls5 Posted September 2, 2019 Author Share Posted September 2, 2019 Dave - They varied a bit through the years and by application, as you can see on the page Underhood/Fender Aprons in the menu. However, the later you go the more holes in them, so you'd be fine with about any of them and use yours as templates for where to put the holes.I am not sure if they would work, mine is an 86' and those start 87-96. I know what you said about the extra holes and that does not bother me. Sure would help if someone on the site had actually tired these on an older truck. Thanks for the reply. Dave On Monday, September 2, 2019, 11:48:41 AM EDT, Gary Lewis [via Bullnose Enthusiasts] <redacted_email_address> wrote: Dave - They varied a bit through the years and by application, as you can see on the page Underhood/Fender Aprons in the menu. However, the later you go the more holes in them, so you'd be fine with about any of them and use yours as templates for where to put the holes. Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutchesBlue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max TowBig Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI If you reply to this email, your message will be added to the discussion below: http://forum.garysgaragemahal.com/NEED-FRONT-INNER-FENDERS-APRONS-1986-F-250-tp37020p37024.html To unsubscribe from NEED FRONT INNER FENDERS (APRONS), 1986 F-250, click here.NAML Link to comment Share on other sites More sharing options...
grumpin Posted September 2, 2019 Share Posted September 2, 2019 My bad! I saw the rear were for the bullnoses, assumed the front were. Link to comment Share on other sites More sharing options...
Recommended Posts