BigDav782 Posted August 26, 2019 Share Posted August 26, 2019 Noticed that this light has a portion on top where the original seal is missing. Was thinking of just a good exterior caulk for the whole thing, but is there a better/easier option? Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 26, 2019 Share Posted August 26, 2019 I think there is a seal for that, but I used a good exterior caulk years ago and it worked fine. I put the caulk in with the screws in but loose, and then tightened up the screws just enough to ensure the light was lined up where it was supposed to be. Then I let it sit overnight and snugged the screws up the next morning. Link to comment Share on other sites More sharing options...
BigDav782 Posted August 26, 2019 Author Share Posted August 26, 2019 I think there is a seal for that, but I used a good exterior caulk years ago and it worked fine. I put the caulk in with the screws in but loose, and then tightened up the screws just enough to ensure the light was lined up where it was supposed to be. Then I let it sit overnight and snugged the screws up the next morning. Thanks Gary - I think the caulk method seems pretty simple. Dave Link to comment Share on other sites More sharing options...
grumpin Posted August 26, 2019 Share Posted August 26, 2019 Thanks Gary - I think the caulk method seems pretty simple. Dave I noticed this recently and used clear RTV on it. Link to comment Share on other sites More sharing options...
Steve83 Posted August 26, 2019 Share Posted August 26, 2019 I'd just cut a hole in a sheet of rubber or foam, use the lamp to screw that to the truck, and then trace around it with an Xacto knife. https://supermotors.net/getfile/1125909/thumbnail/cargolamp_f.jpg Link to comment Share on other sites More sharing options...
Recommended Posts