Rembrant Posted September 14, 2019 Share Posted September 14, 2019 I know I am a bit late to the party here, but I will add this. My truck came with dealer installed a/c, and used the dual belts around the alt, a/c, and water pump. This system would eat belts up in just a couple years of regular a/c usage, and if the a/c was not used much the belts would last MUCH longer. I figure it was due to the York compressor pulley having wider grooves than the other 3 pulleys. The belts simply rode too deep in that a/c pulley, and when it was seeing regular use the extra friction would wear the belts enough that they simply lost grip in the a/c pulley. BTW, finding a matched pair of v-belts is getting much harder to do as the years go by.. Gentlemen, Just to put a bug in your ear, I'm looking for a set of the passenger side dash vents from a dealer installed AC system if you happen to come across any. Link to comment Share on other sites More sharing options...
1986F150Six Posted September 16, 2019 Share Posted September 16, 2019 Gentlemen, Just to put a bug in your ear, I'm looking for a set of the passenger side dash vents from a dealer installed AC system if you happen to come across any. ??? https://www.ebay.com/itm/Heater-Box-Plenum-A-C-vents-control-ASY-1980-96-Ford-Truck-Bronco-F150-F250-F350/163281615100?hash=item260457b8fc:g:7QkAAOSwLmBb3AwR https://www.ebay.com/itm/FORD-80-91-F150-F250-with-dealer-instaled-air-conditioner-AC-outlet-ORIG-NOS/254215262837?hash=item3b30691275:g:IsMAAOSwpw1ahzt7 Link to comment Share on other sites More sharing options...
Recommended Posts