Cinamon Posted July 7, 2019 Share Posted July 7, 2019 Has anyone replaced a rear bumper valance on an early 80’s bronco. ? Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 7, 2019 Share Posted July 7, 2019 You mean 17808 in the drawing below? That's actually DEFLECTOR (REAR BUMPER) in Ford-speak, and the part #'s are: 80/86 U150 — w/step bumper EOTZ 17808-A 80/86 U150 — w/o step bumper EOTZ 17808-B But I don't know any more than that. Link to comment Share on other sites More sharing options...
Cinamon Posted July 7, 2019 Author Share Posted July 7, 2019 the piece that actually comes out from the truck I believed it was called a rear bumper valance. Link to comment Share on other sites More sharing options...
Cinamon Posted July 7, 2019 Author Share Posted July 7, 2019 the piece that actually comes out from the truck I believed it was called a rear bumper valance. Would you know if this piece could be remade duplicated by a sheet metal shop, if I removed it ? Or is it something that would have to be found and replaced with a like part? Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 8, 2019 Share Posted July 8, 2019 Would you know if this piece could be remade duplicated by a sheet metal shop, if I removed it ? Or is it something that would have to be found and replaced with a like part? I don't know if it can be replicated as I've not had one in my hands. Perhaps someone else on here will come along that has had one is their hands and can tell us. As for what the part is called, things are called many different things by people on the street. But that doesn't mean that is what the part actually is. So if you are looking for a part you have to be flexible in what you call it as different people call different parts different things. Technically the part shown as 17808 in that Ford illustration is not a valence. The illustration I included as well as the part numbers are directly from Ford's Master Parts Catalog. So the part is a DEFLECTOR (REAR BUMPER) in Ford-speak, and they should know as it was theirs. And the part #'s are: 80/86 U150 — w/step bumper E0TZ 17808-A 80/86 U150 — w/o step bumper E0TZ 17808-B So, armed with the part number you could Google it and see if someone has one. But that is fraught with problems as there are several ways people list part numbers. The way I've shown the numbers above is the correct way as it is cut and pasted from Ford's catalog. But, many times people that don't know better read the "0" in E0TZ, which is a zero, as an upper case "O". So you should search for it as EOTZ as well as E0TZ. And others that don't know the Ford convention write the part number with a dash, as E0TZ-17808-A or E0TZ-17808-B. And while that is not correct, you need to search for it that way as well because people may list it that way. Link to comment Share on other sites More sharing options...
Steve83 Posted July 8, 2019 Share Posted July 8, 2019 Would you know if this piece could be remade duplicated by a sheet metal shop, if I removed it ? Or is it something that would have to be found and replaced with a like part?Why are you asking? If you still have it, what's wrong with it? Take it to a local sheet metal shop, and ask them to copy it. But it's easier to just put on the better (later) bumper, that doesn't need it. https://supermotors.net/getfile/922798/thumbnail/bumperr8096.jpg Link to comment Share on other sites More sharing options...
Cinamon Posted July 13, 2019 Author Share Posted July 13, 2019 Would you know if this piece could be remade duplicated by a sheet metal shop, if I removed it ? Or is it something that would have to be found and replaced with a like part?Why are you asking? If you still have it, what's wrong with it? Take it to a local sheet metal shop, and ask them to copy it. But it's easier to just put on the better (later) bumper, that doesn't need it. https://supermotors.net/getfile/922798/thumbnail/bumperr8096.jpg They have tried to repair it, (it has two rust pieces, broken right thru) and it’s just not the same. The welds aren’t great. It’s so expensive to replace, or even have it rebuilt. Not sure how to challenge this one now ..? This piece is almost impossible to find . And to be a collector, I need to find one. Help? Link to comment Share on other sites More sharing options...
Steve83 Posted July 13, 2019 Share Posted July 13, 2019 They have tried to repair it, (it has two rust pieces, broken right thru) and it’s just not the same. The welds aren’t great. It’s so expensive to replace, or even have it rebuilt. Not sure how to challenge this one now ..? This piece is almost impossible to find . And to be a collector, I need to find one. Help? I already gave you help, above. But there are no welds on the factory part - post pics of yours. Link to comment Share on other sites More sharing options...
Cinamon Posted July 13, 2019 Author Share Posted July 13, 2019 I already gave you help, above. But there are no welds on the factory part - post pics of yours. Problem is no one has a factory part, or I can’t find one anywhere . Suggestions ? Link to comment Share on other sites More sharing options...
1986F150Six Posted July 25, 2019 Share Posted July 25, 2019 Problem is no one has a factory part, or I can’t find one anywhere . Suggestions ? Is this what you are looking for? http://www.mar-k.com/Catalog/index.aspx?LID=963 Link to comment Share on other sites More sharing options...
Recommended Posts