DH166 Posted June 3, 2019 Share Posted June 3, 2019 I need a set of seat belts for the 81 F100 Custom project, and I have a question. When I look it up on LMC, it gives one part for 1980-1996 truck and Bronco. Is the mounting the same on all those models? If so, that would make it a lot easier to find in my local salvage yard than trying to track down an 80-86 F100. Also, I wouldn't have to pay $200 to LMC . Thanks Link to comment Share on other sites More sharing options...
1986F150Six Posted June 3, 2019 Share Posted June 3, 2019 The receiver [female] end of the front seat belts is straight for the Bronco. It goes directly to the floor between the bucket seats. The bench seat truck seat belts have bends. The following are not complete, but may help you get started: https://www.ebay.com/itm/80-86-Ford-Truck-Front-Bench-Seat-Belt-Buckle-Driver-Left-Genuine-OEM/113688812171?hash=item1a78619a8b:g:57cAAOSwmThcjaaG:sc:USPSFirstClass!95125!US!-1 https://www.ebay.com/itm/80-86-Ford-F100-F150-F250-F350-Standard-Cab-Right-Passenger-Seat-Belt-Buckle/192892359742?fits=Year%3A1981%7CModel%3AF-150%7CMake%3AFord&epid=1494688282&hash=item2ce947d43e:g:hBQAAOSwPBpct5nf:sc:USPSPriorityMailPaddedFlatRateEnvelope!95125!US!-1 https://www.ebay.com/itm/1980-1986-80-86-Ford-Truck-Bronco-Seatbelt-Seat-Belt-Retractor-Red-OEM/132419043889?hash=item1ed4ca4231:g:xiAAAOSw259cI-fe https://www.ebay.com/itm/80-86-Ford-Truck-Front-Bench-Seat-Center-Lap-Belt-Genuine-OEM/312531748930?hash=item48c4580842:g:0TgAAOSwOM5cjac5:sc:USPSFirstClass!95125!US!-1 https://www.ebay.com/itm/Seat-Belts-1980-86-Ford-Truck-Bronco-F150-F250-F350-1986-1985-1984-1983-1980-81/153214670489?hash=item23ac4e5699:g:RykAAOSwZw1bv0Mw https://www.ebay.com/itm/Seat-Belts-Set-Ford-Truck-Bronco-1960-96-1984-84-F150-F250-F350/153014830084?hash=item23a0650404:g:XS0AAOSw2Yta8fMW After market: https://www.ebay.com/itm/Ford-Truck-1980-1986-F150-Standard-2pt-BK-Retract-Bucket-Seat-Belt-Kit-2-Belts/254191048431?hash=item3b2ef796ef:g:Iq4AAOSw4ylcqOGr Link to comment Share on other sites More sharing options...
Steve83 Posted June 3, 2019 Share Posted June 3, 2019 ...one part for 1980-1996 truck and Bronco. Is the mounting the same on all those models?No. They might be selling 1 aftermarket kit that's applicable to all of them, but the original belts are VERY different, in many ways. Broncos are always different from Fs, and even Broncos' belts changed through those years. But Fs changed more... The early F shoulder reel is at ear-level, which is probably what yours has. Later, it moved lower, like Broncos, but still isn't interchangeable (according to Ford). In the late 80s, a large door-jamb button was added, and then it disappeared by the early 90s. My stash has grown since I took this pic: https://supermotors.net/getfile/80835/thumbnail/seat-belts.jpg The buckle is specific to the chair style - not the body (F/Bronco). Captain's chairs & low-back buckets (as found in many Broncos) get a hard molded guide that makes the buckle stand up on the floor. Most other chairs (benches) get a soft buckle (often with a shorter plastic guide) so they can follow the chair as it's adjusted fore-aft. https://supermotors.net/getfile/730441/thumbnail/bucklesfrmocha.jpg Link to comment Share on other sites More sharing options...
Recommended Posts