ETM Posted May 29, 2019 Share Posted May 29, 2019 Hello, Looking for an T19 2wd Tail Shaft. Some Time Back I posted my F250 IDI 4x4, while the motor is bad and working on parting out the body looking at putting the T19 in my F100, to upgrade to 4 speed the trans is an 4x4 with an np205 on the back but not looking to convert my f100 to 4x4 anyone know where I can get an 2wd tail shaft thing. Thanks Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 29, 2019 Share Posted May 29, 2019 Sorry. I'm going to have a T19 for sale, but it is the big block version and is also 4wd. Hopefully someone else will. Link to comment Share on other sites More sharing options...
ETM Posted May 29, 2019 Author Share Posted May 29, 2019 Sorry. I'm going to have a T19 for sale, but it is the big block version and is also 4wd. Hopefully someone else will. Thanks lol Hope to fine one cant seem to find a part my post up on Fake Book and see what I can Find there. the IDI should have an higher gear first 5.1 vs the 6 that the 40 should have. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted July 4, 2019 Share Posted July 4, 2019 Sorry. I'm going to have a T19 for sale, but it is the big block version and is also 4wd. Hopefully someone else will. Thanks lol Hope to fine one cant seem to find a part my post up on Fake Book and see what I can Find there. the IDI should have an higher gear first 5.1 vs the 6 that the 40 should have. I know this is pretty old post and I don't have what you are looking for but wanted to point out that the output shaft of any trany could be different between a 4x2 and 4x4, I know it is for an auto. To replace the out put shaft you need to rebuild the trany and if it is an auto that is the last part out and the first part back in. So you may want to check this out before you get in too deep. Dave ---- Link to comment Share on other sites More sharing options...
Recommended Posts