Quarterwave Posted May 7, 2019 Share Posted May 7, 2019 Hi Guys, My C6 is dripping trans fluid where the bellhousing meets the transmission. The general consensus is that the front main seal is the culprit and that if I replace the front, I might as well replace the rear. So, I'm looking for the part numbers for the front and rear main seals for my C6 so that I can order them. After researching the C6 documents, I'm a little confused. Are they referred to as the "input shaft" and "output shaft" seals? Thanks. Link to comment Share on other sites More sharing options...
Quarterwave Posted May 10, 2019 Author Share Posted May 10, 2019 I guess no one knows! Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 10, 2019 Share Posted May 10, 2019 Sorry, I missed this. And, I see why you are confused. Yes, they are input and output shaft. I'm seeing the output shaft seal as C4AZ 7D011-A. But, I do not see an "input shaft seal" as such. Instead, it looks like C6AZ 7D025-A SEAL (INTERMEDIATE BRAKE DRUM) is the farthest forward seal. So, I am confused as well. I've never had a C6 apart, so I am no where near an authority on this. We need someone else to weigh in. Link to comment Share on other sites More sharing options...
Recommended Posts