JKsWay Posted April 22, 2019 Share Posted April 22, 2019 Hi, I'm going to take the Holley 390 off my 4.9L I6 & Offenhauser C, and install a Motorcraft 2150. Can someone please tell me what I should connect to these 2150 connections...?.. rear left corner of base plate right rear of the air horn right front corner of base plate under choke housing front left corner of base plate under power valve top center of air horn (fuel bowl vent?) choke housing - not the 12V My Holley has distributor advance connected to the primary metering block, 12V to choke, gas to inlet, and air cleaner to valve cover PCV inlet. Grateful for any help clearing up my confusion over what to connect where.... Thanks Jim Link to comment Share on other sites More sharing options...
Gary Lewis Posted April 22, 2019 Share Posted April 22, 2019 Jim - First, when you say "left" or "right" do you mean the driver's side and passenger's side? Or do are you speaking as if you are standing in front of the truck looking towards the rear? And, have you looked at the documentation here? http://www.garysgaragemahal.com/motorcraft-2150.html Link to comment Share on other sites More sharing options...
Recommended Posts