fords4life Posted April 21, 2019 Share Posted April 21, 2019 I had to replace both power steering hoses and the pump a couple weeks ago. I decided to convert to the pressure hoho with the cooler and now I can't find the extra clip I need to mount it to the cross member. Any one have one laying around or know where to find one? I need the clip and bolt. Link to comment Share on other sites More sharing options...
Ray Cecil Posted April 22, 2019 Share Posted April 22, 2019 I bet that wont be hard for the guys who have parts trucks to come up with. Good luck. Link to comment Share on other sites More sharing options...
Gary Lewis Posted April 22, 2019 Share Posted April 22, 2019 Let me look at what I have. Back later...... Link to comment Share on other sites More sharing options...
Gary Lewis Posted April 22, 2019 Share Posted April 22, 2019 Let me look at what I have. Back later...... I have 2/3's of what you need. I have the clamp and factory bolt, but not the factory lock washer. However, it is just a 1/4-20 bolt and I have a generic 1/4" lock washer, so it'll work fine. Email me your address and I'll get them in the mail. Here's the one on Big Blue, and you can see why I need to pull the engine and replace the front seal, and the pic on the left is what I have for you. Link to comment Share on other sites More sharing options...
fords4life Posted April 22, 2019 Author Share Posted April 22, 2019 I have 2/3's of what you need. I have the clamp and factory bolt, but not the factory lock washer. However, it is just a 1/4-20 bolt and I have a generic 1/4" lock washer, so it'll work fine. Email me your address and I'll get them in the mail. Here's the one on Big Blue, and you can see why I need to pull the engine and replace the front seal, and the pic on the left is what I have for you. Thanks Gary! I'll shoot you a PM with my address. No worries on the lock washer. If the bolt is a flange head, it should have the teeth on the back side. If not, I have plenty of 1/4-20 washers laying around. Link to comment Share on other sites More sharing options...
fords4life Posted April 26, 2019 Author Share Posted April 26, 2019 I have 2/3's of what you need. I have the clamp and factory bolt, but not the factory lock washer. However, it is just a 1/4-20 bolt and I have a generic 1/4" lock washer, so it'll work fine. Email me your address and I'll get them in the mail. Here's the one on Big Blue, and you can see why I need to pull the engine and replace the front seal, and the pic on the left is what I have for you. Just wanted to say thanks again Gary! Clip showed up last night and I'll get it on this weekend. Really appreciate it. Link to comment Share on other sites More sharing options...
Gary Lewis Posted April 26, 2019 Share Posted April 26, 2019 Just wanted to say thanks again Gary! Clip showed up last night and I'll get it on this weekend. Really appreciate it. Welcome. Link to comment Share on other sites More sharing options...
Recommended Posts