blackdog Posted March 27, 2019 Share Posted March 27, 2019 I cant get shift linkage off the trans. Last step before I can remove the darn thing. On drivers side of trans, the bracket that hangs on bolt, wont budge at my attempts to pry it off, maybe I'm being a bit too ginger with it, but I also tried the next (nearest from transmission) bracket that is connected by rubber connector, and cant seem to pry that arm off, either. Any ideas would be much appreciated Link to comment Share on other sites More sharing options...
Rembrant Posted March 27, 2019 Share Posted March 27, 2019 If it's the rubber gromments you're talking about, they can sometimes be a pain. I pop them apart using Channellocks if that is any help. The problem with those buggers as that after 30+ years they turn hard as steel and have very little give to them. Put some grease on it, and then press it apart with Channellocks....if you're talking about the joints I'm thinking of...otherwise I'm way off base... Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 27, 2019 Share Posted March 27, 2019 If it's the rubber gromments you're talking about, they can sometimes be a pain. I pop them apart using Channellocks if that is any help. The problem with those buggers as that after 30+ years they turn hard as steel and have very little give to them. Put some grease on it, and then press it apart with Channellocks....if you're talking about the joints I'm thinking of...otherwise I'm way off base... I use a heat gun to soften them and then with Channellocks they come right off. Link to comment Share on other sites More sharing options...
blackdog Posted March 27, 2019 Author Share Posted March 27, 2019 I use a heat gun to soften them and then with Channellocks they come right off. I used heat gun and a screwdriver to pry the arm from the bracket, but chewed up that grommet pretty good beforehand. Got it out though! I cannot thank you guys enough. Today was day three of driving myself crazy with it. Are those grommets readily available? I shouldnt be using the AOD again but might have to if donor trans gears are shot (haven't cracked that open yet). Thanks again, fellers Link to comment Share on other sites More sharing options...
Rembrant Posted March 27, 2019 Share Posted March 27, 2019 Are those grommets readily available? I can't say for 100% certain, but if they are the same as the grommets that are in the shift lever attached to the end of the steering column, then yes they are still available. I bought some at the local Ford dealer last year...oddly, they come in packs of 3. I think they were used in ALL of the Fords with the same style linkage, not just the trucks. Link to comment Share on other sites More sharing options...
blackdog Posted March 28, 2019 Author Share Posted March 28, 2019 Are those grommets readily available? I can't say for 100% certain, but if they are the same as the grommets that are in the shift lever attached to the end of the steering column, then yes they are still available. I bought some at the local Ford dealer last year...oddly, they come in packs of 3. I think they were used in ALL of the Fords with the same style linkage, not just the trucks. my man Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 28, 2019 Share Posted March 28, 2019 my man I found three different ones for the AOD linkage. And I don't know which piece of linkage you were working on: Link to comment Share on other sites More sharing options...
Recommended Posts