jarek_rugby Posted March 16, 2019 Author Share Posted March 16, 2019 No, fuses are bi-directional - they don't care which way the current flows. But, as Steve points out, try to route the wire with the other wires in the area, and possibly zip-tie the wire just before and after the fuse holder to the other wires. And, clean up the battery cable connection to the starter relay while you are doing it. I will. So could i plug it here Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 16, 2019 Share Posted March 16, 2019 I will. So could i plug it here No. If you connect it there then the horn will only honk when you are starting the engine. Hook it to the terminal at the bottom where the positive battery cable connects. Link to comment Share on other sites More sharing options...
jarek_rugby Posted March 16, 2019 Author Share Posted March 16, 2019 No. If you connect it there then the horn will only honk when you are starting the engine. Hook it to the terminal at the bottom where the positive battery cable connects. Ok. Thx. Link to comment Share on other sites More sharing options...
jarek_rugby Posted March 17, 2019 Author Share Posted March 17, 2019 Ok. Thx. Finaly works :) I did it :) thx for all Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 18, 2019 Share Posted March 18, 2019 Finaly works :) I did it :) thx for all Yippee!!! Well done! Link to comment Share on other sites More sharing options...
Recommended Posts