Jump to content
Bullnose Forums

New member from Edinburg,TX 1985 f150


espinozamotor

Recommended Posts

My name is Diego and I am a new member from south Texas. I recently purchased a 1985 f150 scsb 5.8. Truck was purchased at an auction close to Atlanta,GA. Truck almost had no rust. The only rust the truck has is on the front bolt of the bed(drivers side). That is why you can see the body lines a little off there. I will be fixing it soon.

This is how the truck looked like when I purchased it.

1194e398-91b5-4079-8458-4805c3a22764.jpg.8422283eabfaee1fa0a293184203963a.jpg

cbcee9a4-dee5-411a-9adf-560c7688ad1e.jpg.9d0d70bc0beae7d863cc66470b45dd9b.jpg

821d0c72-e6b8-4e8b-9ca1-dbc1d0f991a0.jpg.3a1141c5c75d0684c516d0575ea5a77a.jpg

c6e7d9d4-d88f-4bff-878e-28b1b78e7b3a.jpg.383ef725680a7b33bc398ac4af835a06.jpg

I have since fixed the damage to it. Hood and tailgate are currently getting repainted. Hood needed to be painted because the one I found was tan color and tailgate had some scratches.

Since buying it in December I have

Fixed the damage

Installed different bumpers

Aftermarket radio

Removed vinyl and added carpet

Installed sound deadening under carpet

Added 17x10 billet specialties wheels w/ nitto tires

New tail lights, parking lights, turn signals etc

This is how it looks as of a week ago.

20190117_231910.jpg.9be8e558c0fa6d96d2147ad08399900a.jpg

20190204_215140.jpg.812b12c67fe59f512b0ca1162ee69536.jpg

20190210_180937.jpg.50eff46704b58f75c6c90c6776704ff2.jpg

20190210_180955.jpg.d854d6106f9d9a208d4c66005ce5aa47.jpg

I still have a list of things to do before I can start using it. I have to pull engine and transmission and do a complete tune up. Gaskets, timing chain, carburetor kit, spark plugs etc. I have also bought some headers and exhaust. Speakers and subwoofers are on the way also. Will be getting some shackles to level the back. I have also purchased door panel pockets for the bottom of the door and the chrome tailgate trim. I have also purchased a factory tachometer and got myself a set of door panels that was in bad shape but had the chrome trim in good shape. I had a sliding rear window laying in my storage as well. Window tint is a must in south Texas.

I have joined this forum to gain some knowledge on my truck. I like doing most of the work myself so it is always good to get some advice from people that have experience. Thanks

 

Link to comment
Share on other sites

Welcome, Diego! :nabble_anim_handshake:

Glad you joined us. You've done a wonderful transformation on the truck already. Looks great. :nabble_smiley_good:

We have a member's map (Bullnose Forum/Member's Map) and I'd be happy to put you on it if you want.

I hope you'll start a thread on your truck in the main section so we can keep up with your progress.

Welcome!

Link to comment
Share on other sites

Welcome, Diego! :nabble_anim_handshake:

Glad you joined us. You've done a wonderful transformation on the truck already. Looks great. :nabble_smiley_good:

We have a member's map (Bullnose Forum/Member's Map) and I'd be happy to put you on it if you want.

I hope you'll start a thread on your truck in the main section so we can keep up with your progress.

Thank you Gary. Sure you can add me to the map. I will start a thread in the main section soon.

Link to comment
Share on other sites

Added 17x10 billet specialties wheels w/ nitto tires

Great looking truck Diego.

What size are the Nitto tires?

Did you buy these rims new? Do you know what the offset or backspacking is?

Thanks! The nitto tires are 275 50 17. I did not purchase these wheels new but I can measure the backspace if you need me to. Wheels were bough off facebook from a local that didn't know what he was selling. Bought a show truck and had these wheels on. Basically brand new wheels and tires got him down to $750. Wheels and tires are about $3,100 new. I wouldn't of been able to afford them lol.

Link to comment
Share on other sites

Thanks! The nitto tires are 275 50 17. I did not purchase these wheels new but I can measure the backspace if you need me to. Wheels were bough off facebook from a local that didn't know what he was selling. Bought a show truck and had these wheels on. Basically brand new wheels and tires got him down to $750. Wheels and tires are about $3,100 new. I wouldn't of been able to afford them lol.

No, don't go to any trouble measuring them. Maybe next time you have one of the wheels off if you think of it. I'm just curious. Those Billet Specilties wheels come in custom offsets in 1/8" increments, so they could be anything. I'm really just curious since 10" wide rims usually stick out further than yours do. Must be 5 or 5.5" back spacing. I'm running 275/60/15 on 15x8 rims, so I was curious what yours were. It's hard to find nice wide tires that look good on these trucks and that don't stick out a mile.

You've got a great looking truck there. Nice work.

Link to comment
Share on other sites

×
×
  • Create New...