Machspeed Posted August 18, 2020 Share Posted August 18, 2020 I realize this is an old thread but thought I'd check to see if these stickers are still available. I'm gonna bump this, as I would be interested in these as well. Link to comment Share on other sites More sharing options...
Angelo Voltura Posted August 18, 2020 Share Posted August 18, 2020 I realize this is an old thread but thought I'd check to see if these stickers are still available. I'm gonna bump this, as I would be interested in these as well. If it matters. Dads 85 F250 had them originally. Link to comment Share on other sites More sharing options...
1986F150Six Posted August 20, 2020 Share Posted August 20, 2020 If it matters. Dads 85 F250 had them originally. https://www.ebay.com/itm/Ford-F-150-Bronco-and-Ranger-Manual-Locking-Hub-replacement-stickers/174256182206?hash=item28927a53be:g:c-EAAOSwbklenOkq https://www.ebay.com/itm/Ford-locking-hub-replacement-stickers-2-stickers-per-7-50-pair/174048561781?hash=item28861a4a75:g:9NoAAOSwknpdkfOg Link to comment Share on other sites More sharing options...
Machspeed Posted August 20, 2020 Share Posted August 20, 2020 https://www.ebay.com/itm/Ford-F-150-Bronco-and-Ranger-Manual-Locking-Hub-replacement-stickers/174256182206?hash=item28927a53be:g:c-EAAOSwbklenOkq https://www.ebay.com/itm/Ford-locking-hub-replacement-stickers-2-stickers-per-7-50-pair/174048561781?hash=item28861a4a75:g:9NoAAOSwknpdkfOg Cool....thank you!!! Link to comment Share on other sites More sharing options...
1986F150Six Posted August 20, 2020 Share Posted August 20, 2020 Cool....thank you!!! Link to comment Share on other sites More sharing options...
82F150I6 Posted August 21, 2020 Share Posted August 21, 2020 I wouldn't have thought to look on eBay for these. thx much. Link to comment Share on other sites More sharing options...
Vic Roma Posted September 4, 2020 Share Posted September 4, 2020 Don't all 80's series 1/2 ton trucks and Bronco's have this type hub? Not sure what you mean by "FORD molded in" unless they are the 3/4 hubs?No, my '83 Bronco's original locks didn't have the silver "FORD" stickers. My memory is getting hazy after the past few decades, but the screw was visible in the center, and I think "FORD" was debossed (raised) from the red plastic. Broncos use the same 1/2-ton axle as F150s: the D44IFS. If you spent a few hours decoding the BOMs in this caption & cross-referencing them to known axles & locks, you might be able to figure out which axles got which locks: https://supermotors.net/getfile/72348/thumbnail/d44ifs-hd.jpg...D9TZ 1K105-A. So if someone can find a pic of those...That appears to be just the lock body (the guts); not the dust cap & dial assembly, which is where the sticker goes. http://rmcavoy.freeshell.org/photos/for_sale/FordLockingHubBody.jpg The 1104 number is the whole lock kit (both complete lock assemblies). Are the black and red 'dust cap and dial assemblies' interchangeable? I have the black dials with stickers but want the red dials. Link to comment Share on other sites More sharing options...
Vic Roma Posted September 4, 2020 Share Posted September 4, 2020 Are the black and red 'dust cap and dial assemblies' interchangeable? I have the black dials with stickers but want the red dials. Correction: I have black WARN but prefer red FORD. Link to comment Share on other sites More sharing options...
reamer Posted September 7, 2020 Author Share Posted September 7, 2020 Correction: I have black WARN but prefer red FORD. Yep Still make them, One person in Australia ordered up 12 sets! Link to comment Share on other sites More sharing options...
Jermd21 Posted May 4 Share Posted May 4 Yep Still make them, One person in Australia ordered up 12 sets! Reamer, Reviving an old thread to see if you still have any of these stickers. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts