Butch Posted November 5, 2018 Share Posted November 5, 2018 85 F150 first experience with a Bullnose, have had several slicks and a few bumps and dents. Can the oil pan be pulled on a Bullnose with the motor in the truck? It has a slight knock and I want to inspect the rod bearings. Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 5, 2018 Share Posted November 5, 2018 Depends on the engine. A 460 would be very difficult, if not impossible. A 302 just difficult. Not sure about a 300 six. You have to raise the front of the engine significantly to get the pan off, and taller engines make that more difficult. Link to comment Share on other sites More sharing options...
1986F150Six Posted November 6, 2018 Share Posted November 6, 2018 Depends on the engine. A 460 would be very difficult, if not impossible. A 302 just difficult. Not sure about a 300 six. You have to raise the front of the engine significantly to get the pan off, and taller engines make that more difficult. The six can be done, but not easily. Link to comment Share on other sites More sharing options...
Recommended Posts