Utraquist Posted November 27 Posted November 27 (edited) My horn isnt working, I tried the horn on the battery and it works. The horn used to work and just stopped working recently. My turn light blinkers work but the turn light signal on my cluster dont work work, the right turn signal cluster light worked but stopped at around the same time as the horn. I checked the diagram and seems like the horn leading to the steering wheel bypasses the turn switch harness, is that correct? The cluster lightbulbs have all been replaced, break and seatbelt work only the turn signals dont work, are the cluster signals wired to the turn switch harness and from there go to fuse box or the cluster signals go directly the signal fuse and thats where they relay the message from the turn swich harness? Im suspecting the turn switch harness to be faulty Edited November 27 by Utraquist
ArdWrknTrk Posted November 27 Posted November 27 Do you have cruise control? Do the hazard lights flash the indicators on the cluster? 1
ArdWrknTrk Posted November 27 Posted November 27 Hazards are fuse 1, always hot Turns are fuse 5, hot in run Horn is fuse 16, always hot So some of this may point you towards the ignition switch or the steering column connector.
Utraquist Posted November 27 Author Posted November 27 (edited) 40 minutes ago, ArdWrknTrk said: Do you have cruise control? Do the hazard lights flash the indicators on the cluster? No cruise control, hazard lights work on the outside, but not in the cluster, seems like the wiring from the cluster turn lights to wherever it goes is interrupted, im guessing the horn has nothing to do with this at all Edited November 27 by Utraquist
Utraquist Posted November 27 Author Posted November 27 (edited) 26 minutes ago, ArdWrknTrk said: Hazards are fuse 1, always hot Turns are fuse 5, hot in run Horn is fuse 16, always hot So some of this may point you towards the ignition switch or the steering column connector. fuse 16 for horn has been replaced, sp om guessing horn is strictly positive=>fuse=>steering button=>horn Edited November 27 by Utraquist
Utraquist Posted November 27 Author Posted November 27 Okay so based on the diagram the light wires outside and the bulp in the cluster connect at connection C305 inside the turn signal wiring harness, weird that the cluster lights don't work and outside lights do
ArdWrknTrk Posted November 27 Posted November 27 ... Unless cluster ground 701 by the right of the radio is missing 1
Utraquist Posted November 27 Author Posted November 27 1 hour ago, ArdWrknTrk said: ... Unless cluster ground 701 by the right of the radio is missing Hmmm good point, going to look into that
Recommended Posts