Gary Lewis Posted October 22, 2018 Share Posted October 22, 2018 Guys - I need some help. For the second time in a few days someone has raised the issue of what wheel bolt pattern an F100 uses. Almost four years ago I ran this to ground on FTE: Discussed in this thread And explained in this post I said in that post that we need to get it documented somewhere, but I don't think it has been. And, as the document king, you'd think I would have. But, now that I've had to find that post twice in a few days I'm now determined to document it. However, the question is where? Here are some thoughts: On the Driveline/Wheels page, possibly on the Applications tab at the top. In addition, I should also point out an omission in that table, which doesn't show the 5 x 4.5" wheels used in 1980 and '81, but Bill/Numberdummy said they were in the above thread. However, this seems an obscure spot. In the soon-to-be Wheel section on the Engine & Driveline tab on the Year-To-Year Differences page. But again, that's kinda obscure. On a new tab, maybe labeled F100 Bolt Pattern on the Bullnose FAQ's page. As said, these seem to be obscure places to store what is a seemingly frequent question. So, what suggestions do you have? Please!?!? Link to comment Share on other sites More sharing options...
1986F150Six Posted October 22, 2018 Share Posted October 22, 2018 I vote for the FAQ's page idea. Link to comment Share on other sites More sharing options...
Rembrant Posted October 22, 2018 Share Posted October 22, 2018 I vote for the FAQ's page idea. :nabble_smiley_good: Link to comment Share on other sites More sharing options...
grumpin Posted October 22, 2018 Share Posted October 22, 2018 I vote for the FAQ's page idea. :nabble_smiley_good: Before I read the later posts I looked around and thought another tab on the FAQ page. Then I reread your post and the next two. Duh! So I agree, the FAQ page. Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2018 Author Share Posted October 22, 2018 Before I read the later posts I looked around and thought another tab on the FAQ page. Then I reread your post and the next two. Duh! So I agree, the FAQ page. Ok guys, 3 out of 3 can't be wrong. PLEASE read through it and see if it makes sense to you: Bullnose FAQ's. Also, click on the Wheel Application Chart link on that page and read the explanation I gave on the Driveline/Wheels page, Application tab. Does that combo seem to do it? Link to comment Share on other sites More sharing options...
grumpin Posted October 22, 2018 Share Posted October 22, 2018 Ok guys, 3 out of 3 can't be wrong. PLEASE read through it and see if it makes sense to you: Bullnose FAQ's. Also, click on the Wheel Application Chart link on that page and read the explanation I gave on the Driveline/Wheels page, Application tab. Does that combo seem to do it? I think so! Link to comment Share on other sites More sharing options...
Recommended Posts