Starliner Posted July 15 Author Share Posted July 15 Sorry making a mess of this thread It looks like you have the upper part of the flare side neck that bolts to the "box" bolted to the fender. Look at my first pic and you can see the flare side has a clamp up close to the cap like yours. For the outer part I would get some fuel hose U could use to join the upper cap part to EXH piping & EXH piping to the tank. I would make up the EXH piping to run from the cap to tank with all the bends then figure out the vent tube in side. BTW this is the only place I know of the sells the right size hose for the style sides and all the parts store ones are to short. https://www.fillernecksupply.com/ Now you can get the parts store style side hose, think it has a bend or maybe bends? And use the EXH pipe to make it longer to reach? We got to think outside the box when you have a flare side as there is not a lot of support for us Dave ---- Thanks very much, Dave. I appreciate the direction. Joe Link to comment Share on other sites More sharing options...
Recommended Posts