Tarheel Blue Posted May 27 Share Posted May 27 That would be a good application of 3D printing. But you need one to measure. Still, a piece of aluminum angle epoxied to the brake pedal would be easy. I can post a pic of what I did if it would help. Here are the pics I promised, let me know if you need more. Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 27 Share Posted May 27 Yes, agreed on the measuring. I'd have to do some trial and error to get it right without a reference part, to be sure. If you wouldn't mind posting a picture of what you came up with, I would appreciate it. Here are a couple of pics for what I did. But the dump valve takes very little pressure on the pin, so a piece of aluminum angle epoxied on would be adequate. Link to comment Share on other sites More sharing options...
ckuske Posted May 28 Author Share Posted May 28 Here are a couple of pics for what I did. But the dump valve takes very little pressure on the pin, so a piece of aluminum angle epoxied on would be adequate. Thanks to both of you! This definitely helps. Link to comment Share on other sites More sharing options...
Recommended Posts