Socnarftrucks Posted January 14 Share Posted January 14 Need help determining the Parking position on the roster tail of an AOD transmission? # 1 seem right but I still can get the detent to position 2…. Link to comment Share on other sites More sharing options...
mat in tn Posted January 14 Share Posted January 14 if you look more closely at the rooster comb you will see that at the forward edge of the plate it rests against the aluminum case as a stop. the detent position is park in this position. that would mean #2 in your picture. Link to comment Share on other sites More sharing options...
mat in tn Posted January 14 Share Posted January 14 if you look more closely at the rooster comb you will see that at the forward edge of the plate it rests against the aluminum case as a stop. the detent position is park in this position. that would mean #2 in your picture. as a second point for verification. the parking pawl detent rod is above this and reaches toward the back of the case. you should notice the detent and spring operate the parking pawl as you go to this last detent position. be careful not to get fluid in your eyes as you will need to almost look straight up to see it. Link to comment Share on other sites More sharing options...
Socnarftrucks Posted January 14 Author Share Posted January 14 as a second point for verification. the parking pawl detent rod is above this and reaches toward the back of the case. you should notice the detent and spring operate the parking pawl as you go to this last detent position. be careful not to get fluid in your eyes as you will need to almost look straight up to see it. So, the top position is Parking then… Link to comment Share on other sites More sharing options...
Socnarftrucks Posted January 14 Author Share Posted January 14 So, the top position is Parking then… And yes, I got a drop of tranny fluid in my eye……. Link to comment Share on other sites More sharing options...
mat in tn Posted January 15 Share Posted January 15 And yes, I got a drop of tranny fluid in my eye……. the parking pawl detent in the picture is not engaged. rotate the driveshaft a little until you hear a good click. that should prove the positioning. Link to comment Share on other sites More sharing options...
Socnarftrucks Posted January 15 Author Share Posted January 15 the parking pawl detent in the picture is not engaged. rotate the driveshaft a little until you hear a good click. that should prove the positioning. Thank you. Much appreciated!!! Link to comment Share on other sites More sharing options...
Recommended Posts