Jump to content
Bullnose Forums

Looking for exhaust pipe no one seems to have.


CDLong

Recommended Posts

1985 Ford F-150 XLT Lariat. 302 EFI, C4 automatic 4x4 regular cab long wheelbase, (133 inches). I'm in need of the exhaust pipe from the muffler to the rear of the truck. Several local muffler shops charge $140.xx hour labor to make one. The pipe was $55 from Advanced Auto. When the pipe between the Cat & muffler came in, I asked where's the other pipe? When the parts guys checked, computer showed it wasn't available. Maybe someone here knows of a secret parts stash?. I haven't found one online.
Link to comment
Share on other sites

I always use the Walker website for this stuff...it's usually really good...

https://www.walkerexhaust.com/find-my-part.html

You'll end up with a breakdown like this:

walker_snip.jpg.683052f789b9b6061cc8fe22e5e57605.jpg

Once you have the part number for the tail pipe, you can find them all over the place (or from your local muffler shop, Rock Auto, etc, etc). Link below:

https://www.summitracing.com/parts/wlk-45859

Link to comment
Share on other sites

I always use the Walker website for this stuff...it's usually really good...

https://www.walkerexhaust.com/find-my-part.html

You'll end up with a breakdown like this:

Once you have the part number for the tail pipe, you can find them all over the place (or from your local muffler shop, Rock Auto, etc, etc). Link below:

https://www.summitracing.com/parts/wlk-45859

Here's a few more, even cheaper...

https://www.oreillyauto.com/detail/c/walker/exhaust/tail-pipe/5679af0acee1/walker-steel-tail-pipe/wal0/45859

https://www.fleetpride.com/parts/walker-exhaust-exhaust-tail-pipe-45859

https://shop.advanceautoparts.com/p/walker-tail-pipe-aluminized-485-45859/5382955-P

 

Link to comment
Share on other sites

Keep on buying Walker and Monroe, it helps one part of my pension. I ran into an issue years ago on my 1971 Mercury Colony Park. I needed a muffler and tail pipe, Muffler was no problem but, parts store showed one tailpipe for the wagons (Ford or Mercury) with a 6 cyl and one for all V8s, 302-429 4 barrel. The original part was 1 7/8" for 302, 2" for 351 and 2 1/4" for 429 2 or 4 barrel

Link to comment
Share on other sites

×
×
  • Create New...