85lebaront2 Posted July 11, 2023 Share Posted July 11, 2023 Thanks Bill. And I have dual wideband afr gauges. I'll try it after I get the motor built. Sounds good. Let me know how it turns out. I need, time, space and strong backs with weak minds to help get this installed: Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted July 11, 2023 Author Share Posted July 11, 2023 Sounds good. Let me know how it turns out. I need, time, space and strong backs with weak minds to help get this installed: I have the weak mind, but not the strong back, sorry. Have fun. Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted July 11, 2023 Author Share Posted July 11, 2023 I have the weak mind, but not the strong back, sorry. Have fun. Going in Darth, I assume? Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted July 11, 2023 Author Share Posted July 11, 2023 Going in Darth, I assume? Also, do you know a source for the metering rods and or jets? Link to comment Share on other sites More sharing options...
85lebaront2 Posted July 11, 2023 Share Posted July 11, 2023 Going in Darth, I assume? Yes, 9.3:1 compression .030 over, Sig Erson 261021 cam, Scorpion roller rockers. 42#/hr injectors and I will be using a V10 throttle body once I can come up with a suitable intake hose. It will be pulling air through a 90mm MAF. Link to comment Share on other sites More sharing options...
85lebaront2 Posted July 11, 2023 Share Posted July 11, 2023 Also, do you know a source for the metering rods and or jets? Jets: https://www.carburetor-parts.com/carter-thermoquad-metering-jets Strip Kit: https://www.ebay.com/itm/175063686618 I am not finding but one set of metering rods for a TQ. Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted July 12, 2023 Author Share Posted July 12, 2023 Yes, 9.3:1 compression .030 over, Sig Erson 261021 cam, Scorpion roller rockers. 42#/hr injectors and I will be using a V10 throttle body once I can come up with a suitable intake hose. It will be pulling air through a 90mm MAF. Very nice. But why a v10 throttle body? AND DID YOU SEE THE PRICE ON THAT KIT?!?! Link to comment Share on other sites More sharing options...
85lebaront2 Posted July 12, 2023 Share Posted July 12, 2023 Very nice. But why a v10 throttle body? AND DID YOU SEE THE PRICE ON THAT KIT?!?! V10 throttle body same bolt pattern as a 460, holes just need enlarging from an M6 clearance hole to an M8. Configuration is the sme, cable on right side TPS on left. $5 at Pick-n-Pull vs what an aftermarket one costs. On the strip kit, I believe I saw right around $450. Link to comment Share on other sites More sharing options...
Recommended Posts