James191145 Posted July 3, 2023 Share Posted July 3, 2023 The carb is oriented where electric choke is facing radiator and throttle lever towards firewall. This orientation is for the 6019DP manifold. Link to comment Share on other sites More sharing options...
85lebaront2 Posted July 3, 2023 Share Posted July 3, 2023 It's not just Holley; just checked my Edelbrock AVS, and without a spacer, it drags a runner too - as well as possibly hits that manifold bolt. Same thing, the "Powerglide tail". A spacer will solve it. Link to comment Share on other sites More sharing options...
85lebaront2 Posted July 3, 2023 Share Posted July 3, 2023 The carb is oriented where electric choke is facing radiator and throttle lever towards firewall. This orientation is for the 6019DP manifold. The only question I would have is which side of the manifold feeds the larger portion of the intake ports? Link to comment Share on other sites More sharing options...
brianbronc Posted July 3, 2023 Author Share Posted July 3, 2023 The carb is oriented where electric choke is facing radiator and throttle lever towards firewall. This orientation is for the 6019DP manifold. previous in this post it was mentioned that the throttle linkage faces the radiator...? Link to comment Share on other sites More sharing options...
James191145 Posted July 3, 2023 Share Posted July 3, 2023 previous in this post it was mentioned that the throttle linkage faces the radiator...? On the c series , it is a single plane manifold. Doesnt matter which orientation on that one. The dual plane requires throttle toward firewall. Link to comment Share on other sites More sharing options...
Recommended Posts