Jump to content
Bullnose Forums

Distributor and controller


Recommended Posts

20230529_122555.jpg.8f1e55487f9d1b659adb884225665050.jpg

20230529_122606.jpg.6edc27036d01c8cf611aca83821f90c3.jpg

20230529_122610.jpg.c61cceded853bc40c0acb342822b801f.jpg

20230529_122620.jpg.a6b4bdd740504123a9fc7cebfc627d2e.jpg

Wells spark controller. Known good. It's from a 1990 jeep wagoneer, but same part.

20230529_122633.jpg.cbf7d1799a32c741308846515b491458.jpg

20230529_122640.jpg.894cedb901901f5b825487419ee68d64.jpg

20230529_122719.jpg.5fe365b709cca6b367ccec84071ebdc1.jpg

20230529_122727.jpg.fa4ebcfc0ae774f1d4828e49ebd50cba.jpg

20230529_122737.jpg.ab7bf9713a92e98e6fabaa3e05725cb8.jpg

The distributor could be a bit different. I don't know if it will be the same, but it is a Motorcraft part. Might need a different gear, no idea. Known good.

Link to comment
Share on other sites

The ignition module is a standard DS-II unit as it has the blue grommet. But the connectors aren’t Ford items so will have to be changed to use on a Ford.

The dizzy has the standard Ford connector. And if you can find a # on it I may be able to determine what it is - in a few days.

Link to comment
Share on other sites

×
×
  • Create New...