1986F150Six

https://www.ebay.com/itm/224436518042?epid=1237211232&hash=item3441757c9a:g:r8IAAOSwXLFggvN8

https://www.ebay.com/itm/184792119128?hash=item2b0677f758:g:1jcAAOSwlgNghYzr

Sold!

SOLD!

SOLD!

Nice gesture!

4.9L with automatic overdrive... https://www.ebay.com/itm/194040752651?hash=item2d2dbaea0b:g:b5cAAOSwto1geI3O

Yes. I thought this after reading, "However, as I think about it I'm not sure I can get anything up there since some of the bolts are probably directly over the midship tank." Also, why not use Aluminum instead of steel?

Gary, if using steel to support the weight of the tool box, since you will have your welder available for securing the bed bolts, prior to Line-X, why not tack an appropriate number of nuts to the bed under where the steel support will be. Then, drill through the tool box and metal support such that bolts can be inserted from the bottom of the tool box.

Thanks, Jonathan!

Does the new alternator have a new pulley? Is the belt tension correct? Is the belt new? Is it possible that the battery is not fully charged?

Somebody thought so... SOLD!

Here is another angle, Gary:

Gary, this is what the tailgate will look like...

https://www.ebay.com/itm/274768440977?epid=1375084703&hash=item3ff979ae91:g:ZewAAOSwLnxggLAQ

https://www.ebay.com/itm/154424574277?epid=10021224462&hash=item23f46c0145:g:hC0AAOSw2R9ggZwt

Thank you, Gary, for capturing the photo.

Cool!

Scroll through the photos and see this installation. It looks good. https://www.ebay.com/itm/164784880231?hash=item265df1ba67:g:6swAAOSwsOlgX2RN

SOLD!

Hmmm... wide range between current bids and the Buy It Now price!

Have you looked on eBay or BAT?

I thought of this thread when I saw these [just in case someone else has damaged ones or have lost them]... https://www.ebay.com/itm/174730953269?hash=item28aec6c235:g:RxwAAOSwWDtgaJLN

1980 - 1984 https://www.ebay.com/itm/194050211145?epid=1661695828&hash=item2d2e4b3d49:g:INwAAOSw4eRgfiAd