Motahead

I have a 2inch body lift kit for my 79 still in the box I found. Forgot I had it. Those will work

Crossmember and body mounts are in the same place. Only holes I had to drill out was the 2 for the front of the bed. Radius arm brackets holes had factory rivets in them that I grinder out and they mounted directly behind where the E150 brackets went. Fairly easy swap

Works like it should now if I can just remember what vehicle I used for the rear cab bushings lol

I can get some pictures this weekend. Only thing that I had to change was the rear cab mounts being taller. The rest of the mounts work as they should. The only other thing I had to do was drill the 2 holes for the front of the bed. It was several years ago when I did it but everything else bolted in. Used an 84 E150 frame

Thank you. 2.5 inches is what I was thinking they are. Mine needs to be 4 inches tall. My truck has a E150 frame.. I'll make up a bracket on top of the crossmember to make up the difference

New old member I guess. I'm not very comfortable giving out very much information just yet. Until I get familiar with the site and the folks on here but for now I'm here

I've read thruit. I'm not very good at navigating thru things or computer stuff in general. It doesn't say where to post it or if I have to go to a different page

Installed measurements is fine.

Hello. I have an 83 F150 4x4. Can anyone tell me the height of the rear cab bushings?