1986F150Six Posted March 5, 2023 Share Posted March 5, 2023 https://www.ebay.com/itm/144938273032?epid=1722109383&hash=item21befe8908:g:tuEAAOSw4r5j5aKR Link to comment Share on other sites More sharing options...
FuzzFace2 Posted March 5, 2023 Share Posted March 5, 2023 About $200 and you dont get the much needed under spring mounts for the end links. It would also be nice to have the cross member but the bar mount holes can be drilled. Dave ---- Link to comment Share on other sites More sharing options...
salans7 Posted March 5, 2023 Share Posted March 5, 2023 About $200 and you dont get the much needed under spring mounts for the end links. It would also be nice to have the cross member but the bar mount holes can be drilled. Dave ---- This isn't the version that was used with the 1/2 ton crossmember. This is the one I see more commonly on Broncos and 1/2 ton Supercabs. May also have been on the 3/4 and 1 ton 4x2's. F250 and F350 TTB 4x4 trucks use a different sway bar and crossmember, and then the D60 trucks use a different sway bar as well. Link to comment Share on other sites More sharing options...
Recommended Posts