1980 300 six engine plate / spacer plate - manual trans

I am looking for the plate that goes between the engine and bell housing
Ford Part number C5AZ 7007 A
1980 F250 4x4 300 six 4 speed manual transmission

Thank you
Kevin

klancaster wrote

I am looking for the plate that goes between the engine and bell housing
Ford Part number C5AZ 7007 A
1980 F250 4x4 300 six 4 speed manual transmission

Thank you
Kevin

Kevin,

Too bad you weren't close I have one collecting dust that I'd give you. Good news is that you can use one from 300, 302, 351, or in extreme obscurity a 255 or 3.8 V6, all the way up to 1997, so it's worth a walk through the local junkyard to see if there are any kickin' around. Find a Ford pickup with the trans already pulled, and you could grab one of these covers fairly easily.

Thank you very much for the information.

Its a huge help!

I know its old but you have to make sure its for a stick if that is what you are after as they are different for autos.
You can also find them on the older pick up's too and most were sticks as that is where I got mine from.
Dave ----