new member in AZ 86 f150 2wd

classic Classic list List threaded Threaded
28 messages Options
12
Reply | Threaded
Open this post in threaded view
|

new member in AZ 86 f150 2wd

gotfords
1986 f150 6cyl
1986 f150 2wd short bed 300 cid auto
bought new by my grandfather in valdese NC
no options but a/c
Now with me in Kingman AZ
lower 3" in front and 4" in rear
300 bored .060 with offy 4bbl intake edelbrock carb and split equal length header for true dual exhaust
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Gary Lewis
Administrator
Welcome!  Glad you found us.  

That's a pretty truck and a great story.  

We have a member's map (Bullnose Forum/Member's Map in the menu) and I'd be happy to add you in Kingman if you are ok with that.

What do you think of the 300 with that intake, carb, and exhaust?  Been quite a bit of discussion on here of doing something like that.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

grumpin
Welcome!
Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Rembrant
In reply to this post by Gary Lewis
Gary Lewis wrote
That's a pretty truck and a great story.  

We have a member's map (Bullnose Forum/Member's Map in the menu) and I'd be happy to add you in Kingman if you are ok with that.
That IS a pretty truck.

Isn't Jonathan in or around Kingman these days?
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Ray Cecil
In reply to this post by gotfords
Welcome aboard!!!
1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed


Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
In reply to this post by Gary Lewis
Hi
Please add me to Kingman AZ
that set up works as i have special grind cam and push rods to match. Head work etc...really pops eith the stock 355 gears...fun to hear people guess its v8's of all sizes...i might do the new holley efi at some point to see the difference...thanks for letting me join.
Tommy
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
In reply to this post by grumpin
Thank you
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
In reply to this post by Rembrant
Sorry dont know him
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

1986F150Six
Administrator
In reply to this post by gotfords
Welcome!
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Gary Lewis
Administrator
In reply to this post by gotfords
Tommy - You are now, quite literally, on the map.  And, close to Jonathan.

Good to know about the 300.  Would you be willing to share the details of your build in its own thread?  Like the cam grind, head porting, carb jetting, etc.  I know there are guys on here that are very interested in building a strong 300.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

1986F150Six
Administrator
Some of us do appreciate the characteristics of the 300/4.9L!
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

RenoHuskerDu
In reply to this post by gotfords
Welcome to the forum. Did you bump the compression up? Seems most car makers except BMW have abandoned big sixes, claiming crank flex and long dimensions incompatible with transverse orientation.

But there is no other configuration with perfect balance. That's why so many OTR trucks are big sixes.
https://www.infogalactic.com/info/Engine_balance#Inline_six_cylinder_engines

Can't believe some would mistake your exhaust tone  for a V8.
Reno in Central Texas, 86 F250 XLT Lariat eclb 2wd 6.9, plus 2 Bricknoses, 1 Aeronose that's getting a Bullnose front clip, and parts trucks. Busy lads, father and sons wrenchers.
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Ray Cecil
Yes, I am interested in specs to build my 300. Ive been thinking about the Fitech 2 barrel and a clifford intake.

With the hedman header and true dual setup, people do mistake it for a v8 during idle and low rpm high load situation. Once the engine hits a certain rpm though, there is no mistaking its a six.
1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed


Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
In reply to this post by Gary Lewis
I will pull my paperwork and post the information in the future possibly.
Thanks for interest


From: Gary Lewis [via Bullnose Enthusiasts] <ml+[hidden email]>
Sent: Tuesday, October 15, 2019 7:12:04 AM
To: gotfords <[hidden email]>
Subject: Re: new member in AZ 86 f150 2wd
 
Tommy - You are now, quite literally, on the map.  And, close to Jonathan.

Good to know about the 300.  Would you be willing to share the details of your build in its own thread?  Like the cam grind, head porting, carb jetting, etc.  I know there are guys on here that are very interested in building a strong 300.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI




If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/new-member-in-AZ-86-f150-2wd-tp40943p40992.html
To unsubscribe from new member in AZ 86 f150 2wd, click here.
NAML
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
I dont have exact numbers in my head as my dad and i did this engine build in 1994...has had 20k put on it since then...i have all the paperwork put up...just gotta drag it out...with the two piece split tuned equal length headers and the exhaust mufflers system i experimented with many variations of, i have it sounding like a v8 not a inline 6...i did the exhaust 4 times before I chose this current version...had the c6 built at same time...still have the complete original 60k mile engine on an engine stand...this is an 80 block in it now...also used Pertronix ignitor II ignition replacing the duraspark crap...also i used an older style falcon and agriculture distributor that has the grease fitting to grease the shaft externally...


From: gotfords [via Bullnose Enthusiasts] <ml+[hidden email]>
Sent: Tuesday, October 15, 2019 4:15:10 PM
To: gotfords <[hidden email]>
Subject: Re: new member in AZ 86 f150 2wd
 
I will pull my paperwork and post the information in the future possibly.
Thanks for interest


From: Gary Lewis [via Bullnose Enthusiasts] <ml+[hidden email]>
Sent: Tuesday, October 15, 2019 7:12:04 AM
To: gotfords <[hidden email]>
Subject: Re: new member in AZ 86 f150 2wd
 
Tommy - You are now, quite literally, on the map.  And, close to Jonathan.

Good to know about the 300.  Would you be willing to share the details of your build in its own thread?  Like the cam grind, head porting, carb jetting, etc.  I know there are guys on here that are very interested in building a strong 300.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI




If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/new-member-in-AZ-86-f150-2wd-tp40943p40992.html
To unsubscribe from new member in AZ 86 f150 2wd, click here.
NAML



If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/new-member-in-AZ-86-f150-2wd-tp40943p41048.html
To unsubscribe from new member in AZ 86 f150 2wd, click here.
NAML
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Ray Cecil
gotfords wrote
...i did the exhaust 4 times before I chose this current version...had the c6 built at same time...still have the complete original 60k mile engine on an engine stand...this is an 80 block in it now...also used Pertronix ignitor II ignition replacing the duraspark crap...
Id be interested in buying that 300. Also, would like to know your exhaust setup, as I have a true split exhaust header also. I also upgraded to a Chevy HEI. Be careful calling the duraspark ignition "crap"....im being light hearted, but just a warning, someone is likely argue with you about the ford ignition being crap.....with that said.....I run Petronix in other cars too. I dont do duraspark, its unneccessarily complicated in my humble opinion. HEI is drop in, run a 12v switched from the battery and set the timing, walk away and never think about it again.
1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed


Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Gary Lewis
Administrator
I'm not a purist that thinks that a Ford vehicle has to have a Ford ignition system. But there is one thing a DS-II does that HEI doesn't - retard the timing when cranking. The white wire signals to the ignition module that the starter is engaged, and the box is supposed to retard the timing slightly.

But not all DS-II boxes have that functionality. When I got Big Blue his 460 was hard to start when hot. In fact, it kicked back pretty badly. But I remembered that some boxes don't have that feature and swapped to a Motorcraft box. From that point on the engine never kicked back when starting.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
In reply to this post by Ray Cecil
Tommy Sides has shared OneDrive files with you. To view them, click the images below.
hello
sorry that motor will never be sold unless the truck for some reason is sold etc. ...I mean i guess there is a price but it would not be worth it... i too was being lite hearted on calling duraspark crap but lets call a duck what it is...a duck... the HEI set up is an upgrade but looks horrible to me.. I tried a Davis Unified HEI set up but had oiling issues to the shaft and distr. gear...put the older falcon/agriculture type distr. with grease fitting in and the upgraded Petronix and turn all rpms i can throw at it......Petronix is just as great, never any adjustment or servicing just like your HEI but way cheaper and i keep all my stock looking cap, wires and coil...thats what works for me but not for all i do understand..as far as exhaust goes it is 2.5 all the way back and has two small diameter tube type mufflers that i bought from the muffler shop that did the work after many trials...they were Thrush i believe as it was years ago...he was being paid for all his work and troubles and was happy to help me experiment.....the tailpipes run down pass side because of side mounted gas tank on driver side and turn up over the rear end and then dump out just at the tire still under the truck not exposed/seen...if your ever on i40 in Kingman AZ stop in and check it out and take a listen...have attached some pics of engine bay

From: Ray Cecil [via Bullnose Enthusiasts] <ml+[hidden email]>
Sent: Tuesday, October 15, 2019 5:29 PM
To: gotfords <[hidden email]>
Subject: Re: new member in AZ 86 f150 2wd
 
gotfords wrote
...i did the exhaust 4 times before I chose this current version...had the c6 built at same time...still have the complete original 60k mile engine on an engine stand...this is an 80 block in it now...also used Pertronix ignitor II ignition replacing the duraspark crap...
Id be interested in buying that 300. Also, would like to know your exhaust setup, as I have a true split exhaust header also. I also upgraded to a Chevy HEI. Be careful calling the duraspark ignition "crap"....im being light hearted, but just a warning, someone is likely argue with you about the ford ignition being crap.....with that said.....I run Petronix in other cars too. I dont do duraspark, its unneccessarily complicated in my humble opinion. HEI is drop in, run a 12v switched from the battery and set the timing, walk away and never think about it again.
Ray Cecil
1982 Flareside 300 Six, Hedman Headers, 4x4, SROD 4 Speed, 1 Wire HEI "Little Blue 82"....
1969 Impala Custom Coupe, 86,000 miles, 327, Powerglide.
1999 Silverado, 346,000 miles, 5.3 Automatic Z71 4WD
2008 Tahoe (wife's)




If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/new-member-in-AZ-86-f150-2wd-tp40943p41057.html
To unsubscribe from new member in AZ 86 f150 2wd, click here.
NAML
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

gotfords
In reply to this post by Gary Lewis
Tommy Sides has shared OneDrive files with you. To view them, click the images below.
my timing is up a few degrees and i pump the accelerator two half pumps and it fires up with the Pertronix and high energy spark coil...if one works with theirs as much as i have on setting this thing up you would appreciate the fact when i turn the key it fires every time as it supposed to...this truck is really awesome...i am a lucky man but my dad and I put the work into it to make it this way...added two engine bay pics


From: Gary Lewis [via Bullnose Enthusiasts] <ml+[hidden email]>
Sent: Tuesday, October 15, 2019 7:16 PM
To: gotfords <[hidden email]>
Subject: Re: new member in AZ 86 f150 2wd
 
I'm not a purist that thinks that a Ford vehicle has to have a Ford ignition system. But there is one thing a DS-II does that HEI doesn't - retard the timing when cranking. The white wire signals to the ignition module that the starter is engaged, and the box is supposed to retard the timing slightly.

But not all DS-II boxes have that functionality. When I got Big Blue his 460 was hard to start when hot. In fact, it kicked back pretty badly. But I remembered that some boxes don't have that feature and swapped to a Motorcraft box. From that point on the engine never kicked back when starting.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI




If you reply to this email, your message will be added to the discussion below:
http://forum.garysgaragemahal.com/new-member-in-AZ-86-f150-2wd-tp40943p41061.html
To unsubscribe from new member in AZ 86 f150 2wd, click here.
NAML
TOMMY SIDES
KINGMAN AZ

1986 F150 SWB 2WD REG CAB INLINE 6
4BBL CARB OFFY INTAKE SPLIT HEADER LOWERED 3" F AND 4" R

1984 F250 LWB 2WD REG CAB 460 CARB CALIFORNIA TRUCK
IT PASSES SMOG...LOL

1980 f100 REG CAB SHORT BED 2WD...NO MOTOR OR TRANNY YET!!! FACTORY 300 W/MANUAL IN FLOOR AND A/C
Reply | Threaded
Open this post in threaded view
|

Re: new member in AZ 86 f150 2wd

Ray Cecil
In reply to this post by gotfords
I understand you not wanting to sell the original 300. Still have the original in mine. Its either 160,000 or 260,000. I bought the truck from the original owners son. He wasnt very sure of mileage. But it runs great. Ran like a turd when I got it. Yanked all the california emissions crap off, upgraded to HEI, header and exhaust. Still running the original carter 1 barrel. Its not winning races, but the choke works now and it fires up in the cold. I drive it 300+ miles a week no problems with distributor gear oiling.
1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed


12