intake manifold heater hose junction part

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

intake manifold heater hose junction part

66gtk
Does anybody sell these?  Where can I find a suitable replacement?  1983 F150 302.
Reply | Threaded
Open this post in threaded view
|

Re: intake manifold heater hose junction part

1986F150Six
Not the correct year and the angle looks to be different, but I wonder if this would work?

https://www.ebay.com/itm/NOS-1979-1980-FORD-LTD-CROWN-VICTORIA-5-0L-302-HOT-WATER-HOSE-ELBOW-D9AZ-18599-B/361902826665?hash=item544316e4a9:g:lN0AAOSwh2xYBtTE
1986 F150 4.9L manual O.D. 3.08 Duraspark MSD ignition w/ no EGR
Reply | Threaded
Open this post in threaded view
|

Re: intake manifold heater hose junction part

Gary Lewis
Administrator
In reply to this post by 66gtk
Part numbers are here: http://www.garysgaragemahal.com/elbows.html

Perhaps you can find a new one?
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: intake manifold heater hose junction part

ArdWrknTrk
Administrator
In reply to this post by 66gtk
What's the thread on the other end?

IDK what screws into an '83 302.

I'm assuming 5/8 hose barb would be ok?
 Jim,
Lil'Red is a '87 F250 HD, 4.10's, 1356 4x4, Zf-5, 3G, PMGR, Saginaw PS, desmogged with an Edelbrock 1826 and Performer intake.
Too much other stuff to mention.
Reply | Threaded
Open this post in threaded view
|

Re: intake manifold heater hose junction part

66gtk
This post was updated on .
In reply to this post by Gary Lewis
The link to the part descriptions was very helpful!  Unfortunately none of them look like this elbow.  I have no way to know if my elbow is OEM original.  Anybody else have an original 83 F150 with 302?
Reply | Threaded
Open this post in threaded view
|

Re: intake manifold heater hose junction part

Gary Lewis
Administrator
66gtk wrote
The link to the part descriptions was very helpful!
Glad it helped.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker in front & 10.25 Spicer/Trutrac in back, & EEC-V MAF/SEFI