Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

classic Classic list List threaded Threaded
14 messages Options
Reply | Threaded
Open this post in threaded view
|

Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

1986F150Six
Administrator
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Gary Lewis
Administrator
Pretty!  And pretty expensive as well.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Ford F834
Administrator
In reply to this post by 1986F150Six
These don’t turn up NOS very often... it is pricey but so was the lightly used one I bought some years back.
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Danny G
In reply to this post by 1986F150Six
Dave Carpenter makes these, its not NOS but they are only like $120.
1986 F-150|Standard Cab|4x2|300Six|C6Transmission w/3.08 rear|Name:TBD
2021 Ranger XLT Super Crew
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

grumpin
Somebody snagged it already!
Dane
1986 F250HD SC XLT Lariat 4x4 460 C6-Sold
1992 Bronco XLT 4x4 351W E4OD
1998 GMC Sierra SLE K1500 350 4L60E
Arizona
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

1986F150Six
Administrator
grumpin wrote
Somebody snagged it already!

Hmmm... maybe I helped another person spend their money?
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Gary Lewis
Administrator
One of your many talents.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

1986F150Six
Administrator
Gary Lewis wrote
One of your many talents.  
It is a gift!
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Vic Roma
In reply to this post by Danny G
DC makes them with cruise control? Where?
1984 Bronco 351 Holley Sniper EFI, 3 Speed Ford Auto.
1986 Bronco 302 EFI, AOD, Eddie Bauer, with 3G alternator.
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Ford F834
Administrator
Vic Roma wrote
DC makes them with cruise control? Where?
I have not seen any speed control reproduction horn pads. Non-cruise woodgrain only.

Was it someone here who bought it? I shared it on the freewheeling Facebook page and Alfie Bockemuhl said he would take it but I am not sure if he was serious. I think he is a member here as well.
SHORT BED 4-DOOR DIESEL: 1986 F350 4x4 under construction-- 7.3 IDIT ZF5+GVOD

STRAIGHT SIX 4X4: 1981 F150 2wd to 4x4-- 300 I6 close ratio diesel T19, hydroboost brakes, Saginaw steering

BIG F: 1995 F-Superduty under construction— converting to 6.9L IDI diesel ZF5+DNE2
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Bruce moose4x4
I just posted this one.
https://springfield.craigslist.org/pts/d/cabool-ford-pickup-and-bronco-horn-pad/7058774184.html
Bruce aka Moose--1978 F250 LWB Flareside, Dana 60's w/ 4:10's, 460, c6
Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Gary Lewis
Administrator
As said on that post, that pad is from a van and not a pickup.  However it should work just fine.  But the grain of the "wood" is different.
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Dyn Blin
Maybe a good candidate for our hydrofilm friend?
Sonoma County,CA
1982 F150 Flareside XLS
NP435 4x4
351W Motorcraft 2150

Reply | Threaded
Open this post in threaded view
|

Re: Woodgrain horn cover w/cruise [E0TZ-13A805-A] - NOS

Gary Lewis
Administrator
Yes, I'd think that the horn pad would be a fairly easy thin to hydrodip.  But then, I've never done it on anything, so what do I know.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI