Swapping 1996 4.9 E4OD into 1986 F250 6.9 C6

nic55kel wrote

...if the speed control steering wheel resistors are the same 1986 to 1996.

Same for '7?-04 at least, because the cruise amplifier (module) didn't change from '80-92 (it crossed the line of the '91 body change).  So the '92-up wheel works with both the older & newer cruise amps, which means the resistors have to be the same.  The resistances are probably the same for all Ford/L/M cruise buttons.

Thank you Steve,
great information as always.

After two years of vacillating on this project I finally found a donor that will work.
I found a low mileage 1982 f250 extended cab with a 300 and 4 speed. Rusted out so reasonable price.
I will start a new thread and show pictures as I proceed through the transplant.
I love the 300 with a 4 speed behind it and I am finally excited about this project again.
The fact that it is also extended cab means I can just switch the entire drivetrain over.
I have been looking for a donor like this for over three years and had pretty much given up on the project.
So great day, very happy.

Very cool, good engine!

Excellent!  I'm looking forward to following the journey.