Rear speakers

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

Rear speakers

Ifitaintbroke
While at the yard, I also picked up some pristine rear speakers(with the plastic trim). Has anyone ever put these in a Bullnose? Mine is a supercab, and it appears the rear panel could be cut to accept them, but I'd like to hear some advice before I start cutting.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

85lebaront2
Administrator
I put rear speakers in my crew cab by using a 1996 interior and rear doors. I had put them in the original 1986 rear doors.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

Ifitaintbroke
That sounds cool, but the ones I have came out of a standard cab, and are for the cab corners.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

BigBrother-84
In reply to this post by 85lebaront2
Bill, I think the windows handle holes aren't located the same in 1986 and 1996 cc rear door panels, am I right?

If so, how did you handle this issue?
Jeff / 1984 F350 Crew Cab 4x4/5.8L w351 4V/ T18/ D50 4.10 front/ 8' bed.
Restored 2019-2022.
Nicknamed «Big Brother 1984», due to its soooo-looong shape & nod to George Orwell's 1984 famous novel.
Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

Ifitaintbroke
Good pun, Jeff.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

85lebaront2
Administrator
In reply to this post by BigBrother-84
(a) what window handles?

(b) note the window switch almost directly under the lock button.
(c) note the lack of a window divider

Those are 1996 doors, they bolted right on, and I had the inside cab wiring also so it was just a matter of drilling a hole in the pillar for the wiring harness.


Since then, I scored an extra set of chrome door handles so all 4 match.
Bill AKA "LOBO" Profile

"Getting old is inevitable, growing up is optional" Darth Vader 1986 F350 460 converted to MAF/SEFI, E4OD 12X3 1/2 rear brakes, traction loc 3:55 gear, 160 amp 3G alternator Wife's 2011 Flex Limited Daily Driver 2009 Flex Limited with factory tow package Project car 1986 Chrysler LeBaron convertible 2.2L Turbo II, modified A413

Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

Ifitaintbroke
In reply to this post by Ifitaintbroke
It looks like there is a good spot in the upper interior panel at the rear corner. I'll have to take it off to see how much room is behind there.
Bradley
86 f250 supercab longbed, 4x4, 460 bored to 472 cubes, ported heads, ARP rod bolts, EFI pistons, 5.08/5.41 lift 114° lobe separation flat tappet cam, notched lifters, Smith Brothers pushrods, stock rockers, Eddy Performer intake, Holley 1850 or 3310 depending on mood, custom curved points dizzy, MSD analog 6al triggered by Pertronix module, zf5 swap, 3g alternator, custom instrument cluster, dual tanks with 38 Gal rear for 57 Gal of fuel capacity, far too much more to mention.

98 Ranger standard cab, rwd, 5-speed, 2.5L, glass pack muffler, dual plugs wired to fire at the same time, coming up on 300,000 miles before too long.

Averaging 26-27 mpg.

South Georgia.
Reply | Threaded
Open this post in threaded view
|

Re: Rear speakers

BigBrother-84
This post was updated on .
In reply to this post by 85lebaront2
85lebaront2 wrote
(a) what window handles?
Lol!!!
Ok Bill, I surrender, didn't think about electrical power windows.
Jeff / 1984 F350 Crew Cab 4x4/5.8L w351 4V/ T18/ D50 4.10 front/ 8' bed.
Restored 2019-2022.
Nicknamed «Big Brother 1984», due to its soooo-looong shape & nod to George Orwell's 1984 famous novel.