Power Steering Hose Clip

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Power Steering Hose Clip

fords4life
I had to replace both power steering hoses and the pump a couple weeks ago.  I decided to convert to the pressure hoho with the cooler and now I can't find the extra clip I need to mount it to the cross member.  Any one have one laying around or know where to find one?  I need the clip and bolt.



1986 F-150 SC 2wd 4spd 302EFI Base Model all OEM motor/trans/emissions equipment.
Reply | Threaded
Open this post in threaded view
|

Re: Power Steering Hose Clip

Ray Cecil
I bet that wont be hard for the guys who have parts trucks to come up with. Good luck.
1988 F250 Supercab Longbed 7.3 IDI, C6, 1356, GEARVENDORS, 4.10 Sterling with autolocker

1986 F150 302, C6, 9" 2.75, Wood Flatbed


Reply | Threaded
Open this post in threaded view
|

Re: Power Steering Hose Clip

Gary Lewis
Administrator
In reply to this post by fords4life
Let me look at what I have.  Back later......
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Power Steering Hose Clip

Gary Lewis
Administrator
I have 2/3's of what you need.  I have the clamp and factory bolt, but not the factory lock washer.  However, it is just a 1/4-20 bolt and I have a generic 1/4" lock washer, so it'll work fine.  Email me your address and I'll get them in the mail.

Here's the one on Big Blue, and you can see why I need to pull the engine and replace the front seal, and the pic on the left is what I have for you.

Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI

Reply | Threaded
Open this post in threaded view
|

Re: Power Steering Hose Clip

fords4life
Thanks Gary!  I'll shoot you a PM with my address.

No worries on the lock washer.  If the bolt is a flange head, it should have the teeth on the back side.  If not, I have plenty of 1/4-20 washers laying around.
1986 F-150 SC 2wd 4spd 302EFI Base Model all OEM motor/trans/emissions equipment.
Reply | Threaded
Open this post in threaded view
|

Re: Power Steering Hose Clip

fords4life
In reply to this post by Gary Lewis
Just wanted to say thanks again Gary!  Clip showed up last night and I'll get it on this weekend.  Really appreciate it.
1986 F-150 SC 2wd 4spd 302EFI Base Model all OEM motor/trans/emissions equipment.
Reply | Threaded
Open this post in threaded view
|

Re: Power Steering Hose Clip

Gary Lewis
Administrator
Welcome.  
Gary, AKA "Gary fellow": Profile

Dad's: '81 F150 Ranger XLT 4x4: Down for restomod: Full-roller "stroked 351M" w/Trick Flow heads & intake, EEC-V SEFI/E4OD/3.50 gears w/Kevlar clutches
Blue: 2015 F150 Platinum 4x4 SuperCrew wearing Blue Jeans & sporting a 3.5L EB & Max Tow
Big Blue: 1985 F250HD 4x4: 460/ZF5/3.55's, D60 w/Ox locker & 10.25 Sterling/Trutrac, Blue Top & Borgeson, & EEC-V MAF/SEFI